61.  針對三維體積收縮補償法 : 優化射出成型產品翹曲變形之因素與內在機理探索

葉承杰; Yeh, Cherng-Jyi ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
縮變形改善之研究. (碩士論文), 國立交通大學, 新竹市. [10] Seow, L. W., & Lam, Y. C. (1997). Optimizing flow in plastic injection molding. Journal of Materials Processing

62.  以有機酸溶液進行鎂合金表面處理之研究

張景翔; Chang, Ching-hsiang ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
研磨的潛力。 In the trend of lightweight and energy-saving demands, magnesium alloys become important materials. However, magnesium alloys are susceptible

63.  添加奈米粉體對於乾式相轉換法製備有機-無機混成薄膜性質之影響

林若惠; Lin, Jo-hui ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials”, J. Non-Cryst. Solids, 73（1985）681. 2. H. H. Huang, S. Orler, “Structure-property behavior of new hybrid materials incorporating oligomeric

64.  黏彈性對塑膠射出光學鏡片之光學品質的影響

賴德隆; Lai, De-Lung ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
behavior of polycaprolactone/clay nanocomposites, Journal of Composite Materials 46 (6), pp. 677-689(2012) 5. Hidalgo-Salazar, M.A., Mina, J.H., Herrera

65.  溫感型複合水凝膠系統作為傷口敷料之研究

李佳恬; Lee, Chia-Tien ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
淡江大學化學工程與材料工程學系碩士班 董崇民 李佳恬 Lee, Chia-Tien 溫感型複合水凝膠系統作為傷口敷料之研究 Studies on thermo-responsive composite hydrogel membranes for wound dressing materials

66.  ABS/BN導熱高分子複材之製備與性質研究

蕭翔仁; Hsiao, Hsiang-jen ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
學化工所，2005 【4】J. Ziman，”The thermal properties of materials”，Scientific American Inc.，1976 【5】謝文啟、丁幸一，”PP/α-AO3之熱傳導性質暨物性研究”，逢甲大學化工所，2005 【6】吳于成、林國賡

67.  光/熱硬化型環氧丙烯酸酯樹脂之合成及其性質

蘇宇傑; Su, Yu-chieh ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
filling process, so it is effective in reducing the process time and LC materials. This study is focused on synthesis of photo/thermal type sealant

68.  幾丁聚醣/磷酸三鈣複合薄膜的製備與性質

余虹德; Yu, Hung-te ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials research partA, 75A, 275-282. Liu, X. F., Guan, Y. L., Yang, D. Z., Li, Z, & Yao, K. D. (2001). Antibacterial Action of Chitosan

69.  聚丙烯/黏土/碳黑導電奈米複合材料之製備與性質研究

賀錫耀; Ho, Hsi-yao ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
., P.K. Sara, “Application of frequency sensitive sufaces in electromagnetic shielding”, Journal of Materials Processing Technology, 54,pp.21-28(1995

70.  Preparation and properties of PLAPTT composites

馬瑞克; Sipos, Marek ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Composites for Constructive Parts in Aerospace, Automobiles, and Other Areas, WILEY-VCH, 2004. [8] Jering, A., Gunther, J., Use of renewable raw materials

71.  鈷硼觸媒合成條件對硼氫化鈉反應器設計之影響

潘泉亦; Pan, Chuan-Yi ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, 2008. [2] Sakintuna, B., Lamari-Darkrim, F., Hirscher, M.. “Metal hydride materials for solid hydrogen storage: A review ”, International Journal

72.  雙硬化型環氧丙烯酸酯氧化石墨烯複合材料製備及性質

徐千凢; Shyu, Cian-Fan ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Huang, W.-B. Wang, and M.-X. Ye, “Comparison of the thermal properties between composites reinforced by raw and amino-functionalized carbon materials

73.  二氧化矽奈米粒子之合成與其在超親水及超疏水塗膜之應用

林咨旻; Lin, Zi-Min ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
and materials, Soft Matter, 2011, 7, 9804. 9. E.J.A. Pope, M. Asami, J.D. Mackenzie, Transparent silica gel-PMMA composites, J. Mater. Res, 1989, 4, 1018

74.  丙烷微流道重組產氫系統之最適化設計

江景揚; Yang, Chiang Ching ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
for PEM Fuel Cells - From materials to processing”, Journal of New Materials for Electrochemical Systems, 8, 257, 2005. [20] Karimi, S., Fraser, N

75.  聚乙烯醇接枝玉米澱粉與PHB摻合體的製備與性質

商瑋薇; Shang, Wei-wei ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
OF MATERIALS SCIENCE, 35, 523-545(2000) Imam, S. H., Cinelli, P., Gordon, S. H. and Chiellini, E., Characterization of Biodegradable Comosite Films Prepared

76.  平板式薄膜模組作為熱與物質併合交換器之研究

許泰翔; Shue, Tay-shyang ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Raman, R., S. Mantell, J. Davidson, C. Wu and G. Jorgensen, “A review of polymer materials for solar water heating systems,” J. Sol. Energ. Eng

77.  以溶膠-凝膠法合成中空奈米二氧化矽球狀粒子及其混成塗膜的製備

鄭喬予; Zheng, Chiao-Yu ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
transparent nanocomposite thin films and thicker coatings on PMMA substrates by means of spin coating and doctor-blade coating, respectively. The prepared

78.  聚(3-羥基丁酯)的裂解反應研究及其共聚物的合成

廖國華; Liao, Kuo-Hua ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
。總體結晶速率則藉由Avrami關係式求得，k1/n與1/t0.5值隨著PLA摻合比例逐漸下降，表示PLA的添加會降低PHB高分子鏈的移動性。 Because polymeric materials have excellent plasticity, properties and low

79.  使用旋轉盤微過濾分離微藻懸浮液

林炫君; Lin, Syuan-Jyun ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
the shear force. Measuring the functional groups of the materials in the filter cake using Fourier transform infrared spectroscopy indicates

80.  以六氯化鎢為起始物製備鉑三氧化鎢甲醇氧化電催化劑與其性質分析

王志仲; Wang, Chih-Chung ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials for the direct methanol fuel cell”, Lasch, K.; Hayn, G.; Jorissen, L..; Garche, J.; besenhardt, O.; J. Power Sources 2002, 105, 305-310. [35

81.  聚乳酸/氮化鋁導熱高分子複材之製備與性質研究

鄧佳宜; Teng, Chia-I ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
was analyzed by tensile test, impact test, DSC, SEM and thermal conductivity. We found poly(lactic acid) is a hard and brittle materials form tensile test

82.  藉由與銀複合來提升ZnO的光催化能力

錢東緯; Qian, Dong-Wei ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
solvothermal synthesis of condensed inorganic materials,” Chem. Soc. Rev., 31, 230-238 (2002) 7. D. J. Watson, C. A. Randall, “Hydrothermal formation

83.  光熱雙硬化型環氧丙烯酸酯樹脂-二氧化矽複合材料製備及其性質研究

蘇宇傑; Su, Yu-Chieh ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, Materials Science and Engineering A. 528 (2011) 6769-6775. [47] F. Piscitelli, A.M. Scamardella, V. Romeo, M. Lavorgna, G. Barra, E. Amendola, J Appl

84.  製備多孔性氮化鎵微米柱結構並利用機械式剝離技術製作高功率垂直式發光二極體之研究

侯翔彬; Hou, Hsiang-Pin ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
thin films with dissimilar substrate materials by Pd-In metal bonding and laser liftoff," J. Electron. Mater., 28, p. 1409, 1999. [24] C. F. Chu, et al

85.  製備鉑-二氧化鈰碳甲醇氧化電催化劑與其性質分析

李盈層; Li, Ying-Tseng ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
nanoparticles and CeO2 on the carbon black (CB), then get the Pt-CeO2/C nanocomposite electrocatalysts. Scanning electron microscopic (SEM) images