51.  以掃描式電化學顯微鏡分析由接觸起電引起之表面電場

林亭㚬; Lin, Ting-Jiun ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Materials, 10(16), 1380-1385. 6. Arpin, K. A., Mihi, A., Johnson, H. T., Baca, A. J., Rogers, J. A., Lewis, J. A., & Braun, P. V. (2010

52.  以聚乙二醇修飾三氧化鎢氧化鈦複合薄膜微結構及其電致色變性質之研究

楊振緯; Yang, Zhen-Wei ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
the metal tungsten powder and hydrogen peroxide as starting materials, and adding polyethylene glycol (PEG, MW = 20,000) to prepare precursor. Dried

53.  紫外光敏感性幾丁聚醣及幾丁聚醣交聯聚乙二醇二甲基丙烯酸酯薄膜的製備

林蔓津; Lin, Man-chin ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Synthesis and properties of poly(ethylene glycol) macromer/β-chitosan hydrogels. Journal of Materials Science: Materials in Medicine 1997;8(9):537-541. 10

54.  白金奈米粒子-碳黑複合膜之製備與分析及其在可撓式染料敏化太陽能電池的應用

黃柏蒼; Huang, Bo-Tsang ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
] A. Kay, M. Gratzel, “Low cost photovoltaic modules based on dye sensitized nanocrystalline titanium dioxide and carbon powder”, Solar Energy Materials

55.  塑膠基材上製備二氧化矽壓克力聚合物抗霧鍍膜

蔡宗穎; Tsai, Tsung-Ying ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
複合材料;溶膠-凝膠法;二氧化矽;UV曝光硬化;anti-fog coatings;nano hybrid materials;Sol-gel process;Silica;UV curing 本研究以溶膠凝膠法搭配紫外光硬化製程，製備有機-無機奈米複合材料並應用於抗霧鍍膜上。 此實驗已成功合成出含

56.  鈷硼觸媒合成條件對硼氫化鈉水解產氫曲線之影響

李冠緯; Lee, Kuan-Wei ,  2015
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
)。產氫與儲氫技術。臺北市：五南圖書出版公司。 [4] Sakintuna, B., Lamari-Darkrim, F., Hirscher, M.. “Metal hydride materials for solid hydrogen storage: A review

57.  製備穩定之油相奈米銀顆粒懸浮液

楊汶姍; Yang, Wen-Shan ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
for preparation of nanosized silver powder and colloid dispersion, Materials Research Bulletin, 38(2003), p.949-956 [6] Ki Young Kim, Young Tai Choi, Dae

58.  聚磺酸苯乙烯對銦錫氧化物奈米粒子之製備、形態以及性質之影響

薛玫玲; Shuwei, May-ling ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
to prepare ITO nanoparticles, the starting materials were indium nitrate, tin chloride, and ammonium hydroxide. The previous research showed

59.  遮蔽近紅外線含鎢錯合物高分子光學膜之製備與性質分析

王雅菱; Wang, Ya-ling ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, synthesis and characterization of the UV curable expoxy acrylate/tungsten hybrid materials and their applications on the near infrared shielding film

60.  聚羥基丁酯聚乳酸摻合物的相容性與生物分解行為

劉義峋; Liu, Yi-Hsun ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world. Progress in Materials Science, 2005

61.  針對三維體積收縮補償法 : 優化射出成型產品翹曲變形之因素與內在機理探索

葉承杰; Yeh, Cherng-Jyi ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
縮變形改善之研究. (碩士論文), 國立交通大學, 新竹市. [10] Seow, L. W., & Lam, Y. C. (1997). Optimizing flow in plastic injection molding. Journal of Materials Processing

62.  以有機酸溶液進行鎂合金表面處理之研究

張景翔; Chang, Ching-hsiang ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
研磨的潛力。 In the trend of lightweight and energy-saving demands, magnesium alloys become important materials. However, magnesium alloys are susceptible

63.  添加奈米粉體對於乾式相轉換法製備有機-無機混成薄膜性質之影響

林若惠; Lin, Jo-hui ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials”, J. Non-Cryst. Solids, 73（1985）681. 2. H. H. Huang, S. Orler, “Structure-property behavior of new hybrid materials incorporating oligomeric

64.  黏彈性對塑膠射出光學鏡片之光學品質的影響

賴德隆; Lai, De-Lung ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
behavior of polycaprolactone/clay nanocomposites, Journal of Composite Materials 46 (6), pp. 677-689(2012) 5. Hidalgo-Salazar, M.A., Mina, J.H., Herrera

65.  溫感型複合水凝膠系統作為傷口敷料之研究

李佳恬; Lee, Chia-Tien ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
淡江大學化學工程與材料工程學系碩士班 董崇民 李佳恬 Lee, Chia-Tien 溫感型複合水凝膠系統作為傷口敷料之研究 Studies on thermo-responsive composite hydrogel membranes for wound dressing materials

66.  ABS/BN導熱高分子複材之製備與性質研究

蕭翔仁; Hsiao, Hsiang-jen ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
學化工所，2005 【4】J. Ziman，”The thermal properties of materials”，Scientific American Inc.，1976 【5】謝文啟、丁幸一，”PP/α-AO3之熱傳導性質暨物性研究”，逢甲大學化工所，2005 【6】吳于成、林國賡

67.  光/熱硬化型環氧丙烯酸酯樹脂之合成及其性質

蘇宇傑; Su, Yu-chieh ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
filling process, so it is effective in reducing the process time and LC materials. This study is focused on synthesis of photo/thermal type sealant

68.  幾丁聚醣/磷酸三鈣複合薄膜的製備與性質

余虹德; Yu, Hung-te ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials research partA, 75A, 275-282. Liu, X. F., Guan, Y. L., Yang, D. Z., Li, Z, & Yao, K. D. (2001). Antibacterial Action of Chitosan

69.  聚丙烯/黏土/碳黑導電奈米複合材料之製備與性質研究

賀錫耀; Ho, Hsi-yao ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
., P.K. Sara, “Application of frequency sensitive sufaces in electromagnetic shielding”, Journal of Materials Processing Technology, 54,pp.21-28(1995

70.  Preparation and properties of PLAPTT composites

馬瑞克; Sipos, Marek ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Composites for Constructive Parts in Aerospace, Automobiles, and Other Areas, WILEY-VCH, 2004. [8] Jering, A., Gunther, J., Use of renewable raw materials

71.  鈷硼觸媒合成條件對硼氫化鈉反應器設計之影響

潘泉亦; Pan, Chuan-Yi ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, 2008. [2] Sakintuna, B., Lamari-Darkrim, F., Hirscher, M.. “Metal hydride materials for solid hydrogen storage: A review ”, International Journal

72.  雙硬化型環氧丙烯酸酯氧化石墨烯複合材料製備及性質

徐千凢; Shyu, Cian-Fan ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Huang, W.-B. Wang, and M.-X. Ye, “Comparison of the thermal properties between composites reinforced by raw and amino-functionalized carbon materials

73.  二氧化矽奈米粒子之合成與其在超親水及超疏水塗膜之應用

林咨旻; Lin, Zi-Min ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
and materials, Soft Matter, 2011, 7, 9804. 9. E.J.A. Pope, M. Asami, J.D. Mackenzie, Transparent silica gel-PMMA composites, J. Mater. Res, 1989, 4, 1018

74.  丙烷微流道重組產氫系統之最適化設計

江景揚; Yang, Chiang Ching ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
for PEM Fuel Cells - From materials to processing”, Journal of New Materials for Electrochemical Systems, 8, 257, 2005. [20] Karimi, S., Fraser, N

75.  聚乙烯醇接枝玉米澱粉與PHB摻合體的製備與性質

商瑋薇; Shang, Wei-wei ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
OF MATERIALS SCIENCE, 35, 523-545(2000) Imam, S. H., Cinelli, P., Gordon, S. H. and Chiellini, E., Characterization of Biodegradable Comosite Films Prepared