81.  聚乳酸/氮化鋁導熱高分子複材之製備與性質研究

鄧佳宜; Teng, Chia-I ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
was analyzed by tensile test, impact test, DSC, SEM and thermal conductivity. We found poly(lactic acid) is a hard and brittle materials form tensile test

82.  藉由與銀複合來提升ZnO的光催化能力

錢東緯; Qian, Dong-Wei ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
solvothermal synthesis of condensed inorganic materials,” Chem. Soc. Rev., 31, 230-238 (2002) 7. D. J. Watson, C. A. Randall, “Hydrothermal formation

83.  光熱雙硬化型環氧丙烯酸酯樹脂-二氧化矽複合材料製備及其性質研究

蘇宇傑; Su, Yu-Chieh ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, Materials Science and Engineering A. 528 (2011) 6769-6775. [47] F. Piscitelli, A.M. Scamardella, V. Romeo, M. Lavorgna, G. Barra, E. Amendola, J Appl

84.  製備多孔性氮化鎵微米柱結構並利用機械式剝離技術製作高功率垂直式發光二極體之研究

侯翔彬; Hou, Hsiang-Pin ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
thin films with dissimilar substrate materials by Pd-In metal bonding and laser liftoff," J. Electron. Mater., 28, p. 1409, 1999. [24] C. F. Chu, et al

85.  製備鉑-二氧化鈰碳甲醇氧化電催化劑與其性質分析

李盈層; Li, Ying-Tseng ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
nanoparticles and CeO2 on the carbon black (CB), then get the Pt-CeO2/C nanocomposite electrocatalysts. Scanning electron microscopic (SEM) images

86.  利用逆微胞法製備具有二氧化矽奈米粒子材料之結構與性質研究

洪笠尊; Hong, Li-Tzuen ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
淡江大學化學工程與材料工程學系碩士班 賴偉淇 洪笠尊 Hong, Li-Tzuen 利用逆微胞法製備具有二氧化矽奈米粒子材料之結構與性質研究 The structures and properties of nanosilica materials prepared via reverse

87.  改良式太陽能驅動氣隔式薄膜蒸餾海水淡化系統之經濟評估

宋振銓; Song, Chen-Chuan ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, S.B.; Guddad, M.. “Reverse Osmosis andMembrane Distillation for Desalination of Groundwater: A Review”, ISRN Materials Science, 2011. [2] Paul R

88.  多模穴幾何變化與操作條件整合效應對共射成型核心層分佈之影響

陳冠豪; Chen, Kuan-Hao ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
系統，其影響效應非常大，僅透過調整成型參數來改善核心層材料(core materials)之分佈情形之效果並不明顯，故本研究以探討模穴幾何變異為主，成型參數改變為輔，對於產品良率不佳之問題進行優化與改善。明確而言，本研究利用Moldex3D R14模流分析軟體進行分離式不平衡多模穴系統，探索發現此系

89.  煆燒氣氛對檸檬酸鹽先驅物衍生LaAlO3 成相溫度的影響

郭于嫚; Kuo, Yu-man ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, “Evaluation of Sr- and Mn-substituted LaAlO3 as potential SOFC anode materials.” Solid State Ionics., 177 1059-1069 (2006). 32. D. Zhou, G. Huang, X. Chen

90.  Effects of ph and calcination temperatures on the formation of citrate-derived hexagonal barium ferrite

劉佩琪; Liu, Pei-chi ,  2005
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Society for Testing and Materials. 52. Cullity BD, introduction to Magnetic Materials. Addison-Wesley Pub. Co.;1972.p.198-200. 53. Stoner EC, Wohlfarth