61.  針對三維體積收縮補償法 : 優化射出成型產品翹曲變形之因素與內在機理探索

葉承杰; Yeh, Cherng-Jyi ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
縮變形改善之研究. (碩士論文), 國立交通大學, 新竹市. [10] Seow, L. W., & Lam, Y. C. (1997). Optimizing flow in plastic injection molding. Journal of Materials Processing

62.  以有機酸溶液進行鎂合金表面處理之研究

張景翔; Chang, Ching-hsiang ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
研磨的潛力。 In the trend of lightweight and energy-saving demands, magnesium alloys become important materials. However, magnesium alloys are susceptible

63.  添加奈米粉體對於乾式相轉換法製備有機-無機混成薄膜性質之影響

林若惠; Lin, Jo-hui ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials”, J. Non-Cryst. Solids, 73（1985）681. 2. H. H. Huang, S. Orler, “Structure-property behavior of new hybrid materials incorporating oligomeric

64.  黏彈性對塑膠射出光學鏡片之光學品質的影響

賴德隆; Lai, De-Lung ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
behavior of polycaprolactone/clay nanocomposites, Journal of Composite Materials 46 (6), pp. 677-689(2012) 5. Hidalgo-Salazar, M.A., Mina, J.H., Herrera

65.  溫感型複合水凝膠系統作為傷口敷料之研究

李佳恬; Lee, Chia-Tien ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
淡江大學化學工程與材料工程學系碩士班 董崇民 李佳恬 Lee, Chia-Tien 溫感型複合水凝膠系統作為傷口敷料之研究 Studies on thermo-responsive composite hydrogel membranes for wound dressing materials

66.  ABS/BN導熱高分子複材之製備與性質研究

蕭翔仁; Hsiao, Hsiang-jen ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
學化工所，2005 【4】J. Ziman，”The thermal properties of materials”，Scientific American Inc.，1976 【5】謝文啟、丁幸一，”PP/α-AO3之熱傳導性質暨物性研究”，逢甲大學化工所，2005 【6】吳于成、林國賡

67.  光/熱硬化型環氧丙烯酸酯樹脂之合成及其性質

蘇宇傑; Su, Yu-chieh ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
filling process, so it is effective in reducing the process time and LC materials. This study is focused on synthesis of photo/thermal type sealant

68.  幾丁聚醣/磷酸三鈣複合薄膜的製備與性質

余虹德; Yu, Hung-te ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials research partA, 75A, 275-282. Liu, X. F., Guan, Y. L., Yang, D. Z., Li, Z, & Yao, K. D. (2001). Antibacterial Action of Chitosan

69.  聚丙烯/黏土/碳黑導電奈米複合材料之製備與性質研究

賀錫耀; Ho, Hsi-yao ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
., P.K. Sara, “Application of frequency sensitive sufaces in electromagnetic shielding”, Journal of Materials Processing Technology, 54,pp.21-28(1995

70.  Preparation and properties of PLAPTT composites

馬瑞克; Sipos, Marek ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Composites for Constructive Parts in Aerospace, Automobiles, and Other Areas, WILEY-VCH, 2004. [8] Jering, A., Gunther, J., Use of renewable raw materials

71.  鈷硼觸媒合成條件對硼氫化鈉反應器設計之影響

潘泉亦; Pan, Chuan-Yi ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, 2008. [2] Sakintuna, B., Lamari-Darkrim, F., Hirscher, M.. “Metal hydride materials for solid hydrogen storage: A review ”, International Journal

72.  雙硬化型環氧丙烯酸酯氧化石墨烯複合材料製備及性質

徐千凢; Shyu, Cian-Fan ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Huang, W.-B. Wang, and M.-X. Ye, “Comparison of the thermal properties between composites reinforced by raw and amino-functionalized carbon materials

73.  二氧化矽奈米粒子之合成與其在超親水及超疏水塗膜之應用

林咨旻; Lin, Zi-Min ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
and materials, Soft Matter, 2011, 7, 9804. 9. E.J.A. Pope, M. Asami, J.D. Mackenzie, Transparent silica gel-PMMA composites, J. Mater. Res, 1989, 4, 1018

74.  丙烷微流道重組產氫系統之最適化設計

江景揚; Yang, Chiang Ching ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
for PEM Fuel Cells - From materials to processing”, Journal of New Materials for Electrochemical Systems, 8, 257, 2005. [20] Karimi, S., Fraser, N

75.  聚乙烯醇接枝玉米澱粉與PHB摻合體的製備與性質

商瑋薇; Shang, Wei-wei ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
OF MATERIALS SCIENCE, 35, 523-545(2000) Imam, S. H., Cinelli, P., Gordon, S. H. and Chiellini, E., Characterization of Biodegradable Comosite Films Prepared

76.  平板式薄膜模組作為熱與物質併合交換器之研究

許泰翔; Shue, Tay-shyang ,  2007
[化學工程與材料工程學系暨研究所] 學位論文
. Raman, R., S. Mantell, J. Davidson, C. Wu and G. Jorgensen, “A review of polymer materials for solar water heating systems,” J. Sol. Energ. Eng

77.  以溶膠-凝膠法合成中空奈米二氧化矽球狀粒子及其混成塗膜的製備

鄭喬予; Zheng, Chiao-Yu ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
transparent nanocomposite thin films and thicker coatings on PMMA substrates by means of spin coating and doctor-blade coating, respectively. The prepared

78.  聚(3-羥基丁酯)的裂解反應研究及其共聚物的合成

廖國華; Liao, Kuo-Hua ,  2013
[化學工程與材料工程學系暨研究所] 學位論文
。總體結晶速率則藉由Avrami關係式求得，k1/n與1/t0.5值隨著PLA摻合比例逐漸下降，表示PLA的添加會降低PHB高分子鏈的移動性。 Because polymeric materials have excellent plasticity, properties and low

79.  使用旋轉盤微過濾分離微藻懸浮液

林炫君; Lin, Syuan-Jyun ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
the shear force. Measuring the functional groups of the materials in the filter cake using Fourier transform infrared spectroscopy indicates

80.  以六氯化鎢為起始物製備鉑三氧化鎢甲醇氧化電催化劑與其性質分析

王志仲; Wang, Chih-Chung ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
materials for the direct methanol fuel cell”, Lasch, K.; Hayn, G.; Jorissen, L..; Garche, J.; besenhardt, O.; J. Power Sources 2002, 105, 305-310. [35

81.  聚乳酸/氮化鋁導熱高分子複材之製備與性質研究

鄧佳宜; Teng, Chia-I ,  2011
[化學工程與材料工程學系暨研究所] 學位論文
was analyzed by tensile test, impact test, DSC, SEM and thermal conductivity. We found poly(lactic acid) is a hard and brittle materials form tensile test

82.  藉由與銀複合來提升ZnO的光催化能力

錢東緯; Qian, Dong-Wei ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
solvothermal synthesis of condensed inorganic materials,” Chem. Soc. Rev., 31, 230-238 (2002) 7. D. J. Watson, C. A. Randall, “Hydrothermal formation

83.  光熱雙硬化型環氧丙烯酸酯樹脂-二氧化矽複合材料製備及其性質研究

蘇宇傑; Su, Yu-Chieh ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
, Materials Science and Engineering A. 528 (2011) 6769-6775. [47] F. Piscitelli, A.M. Scamardella, V. Romeo, M. Lavorgna, G. Barra, E. Amendola, J Appl

84.  製備多孔性氮化鎵微米柱結構並利用機械式剝離技術製作高功率垂直式發光二極體之研究

侯翔彬; Hou, Hsiang-Pin ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
thin films with dissimilar substrate materials by Pd-In metal bonding and laser liftoff," J. Electron. Mater., 28, p. 1409, 1999. [24] C. F. Chu, et al

85.  製備鉑-二氧化鈰碳甲醇氧化電催化劑與其性質分析

李盈層; Li, Ying-Tseng ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
nanoparticles and CeO2 on the carbon black (CB), then get the Pt-CeO2/C nanocomposite electrocatalysts. Scanning electron microscopic (SEM) images

86.  利用逆微胞法製備具有二氧化矽奈米粒子材料之結構與性質研究

洪笠尊; Hong, Li-Tzuen ,  2014
[化學工程與材料工程學系暨研究所] 學位論文
淡江大學化學工程與材料工程學系碩士班 賴偉淇 洪笠尊 Hong, Li-Tzuen 利用逆微胞法製備具有二氧化矽奈米粒子材料之結構與性質研究 The structures and properties of nanosilica materials prepared via reverse

87.  改良式太陽能驅動氣隔式薄膜蒸餾海水淡化系統之經濟評估

宋振銓; Song, Chen-Chuan ,  2017
[化學工程與材料工程學系暨研究所] 學位論文
, S.B.; Guddad, M.. “Reverse Osmosis andMembrane Distillation for Desalination of Groundwater: A Review”, ISRN Materials Science, 2011. [2] Paul R

88.  多模穴幾何變化與操作條件整合效應對共射成型核心層分佈之影響

陳冠豪; Chen, Kuan-Hao ,  2017
[化學工程與材料工程學系暨研究所] 學位論文
系統，其影響效應非常大，僅透過調整成型參數來改善核心層材料(core materials)之分佈情形之效果並不明顯，故本研究以探討模穴幾何變異為主，成型參數改變為輔，對於產品良率不佳之問題進行優化與改善。明確而言，本研究利用Moldex3D R14模流分析軟體進行分離式不平衡多模穴系統，探索發現此系

89.  煆燒氣氛對檸檬酸鹽先驅物衍生LaAlO3 成相溫度的影響

郭于嫚; Kuo, Yu-man ,  2008
[化學工程與材料工程學系暨研究所] 學位論文
, “Evaluation of Sr- and Mn-substituted LaAlO3 as potential SOFC anode materials.” Solid State Ionics., 177 1059-1069 (2006). 32. D. Zhou, G. Huang, X. Chen

90.  Effects of ph and calcination temperatures on the formation of citrate-derived hexagonal barium ferrite

劉佩琪; Liu, Pei-chi ,  2005
[化學工程與材料工程學系暨研究所] 學位論文
Society for Testing and Materials. 52. Cullity BD, introduction to Magnetic Materials. Addison-Wesley Pub. Co.;1972.p.198-200. 53. Stoner EC, Wohlfarth

91.  改質奈米二氧化矽/高分子複合材料之製備與物性分析

歐陽岱岳; Oyang, Tai-yueh ,  2006
[化學工程與材料工程學系暨研究所] 學位論文
materials 奈米二氧化矽;奈米粒子表面改質;溶膠凝膠程序;有機無機混成;nano-silica;surface modified of nano-silica;ol-gel process;organic-inorganic hybrid 本研究是經由溶膠凝膠製程，將四乙氧基矽烷(TEOS)先行水解、縮

92.  P/Si莫爾比對P/Si-TiO2光觸媒相穩定與光催化性質的影響

楊士德; Yang, Shih-te ,  2009
[化學工程與材料工程學系暨研究所] 學位論文
as a catalyst to control the structuresof mesoporous titanium dioxide materials” Microporous and Mesoporous Mater 84,27-33(2005). 29.I.H.

93.  含鎢氧化物光致變色高分子混成薄膜之製備及其性質分析

陳志維; Chen, Chih-wei ,  2008
[化學工程與材料工程學系暨研究所] 學位論文
photochromic materials and had excellent potential in heat insulation applications. 2008 1.王品然，王正全；工業材料，2004，119-127 2醫護服務業安全健康通訊，2002，1-6 3張仕欣，李文錦，張光偉；工業材料

94.  丁基乳膠奈米黏土複合材料之製備與物性探討

趙之晟; Chao, Chiz-cheng ,  2007
[化學工程與材料工程學系暨研究所] 學位論文
of Advanced Materials 2001; 2: 449-454 [27] y. lkeda, s. kohjiya Chem. Research Japan 1996 [28] K.E. Strawhecker, E. Manias, Chem. Mater. 2000; 12

95.  聚乙烯/聚丙烯/碳黑摻雜型導電高分子之製備與性質研究

吳建宏; Wu, Chien-hung ,  2006
[化學工程與材料工程學系暨研究所] 學位論文
. K. Sara, “Application of frequency sensitive sufaces in electromagnetic shielding”, Journal of Materials Processing Technology, Vol. 54

96.  光致變色金屬氧化物 : 高分子混成薄膜之製備及其近紅外線吸收性質分析

蕭佩芸; Hsiao, Pei-yun ,  2009
[化學工程與材料工程學系暨研究所] 學位論文
29.Tao He and Jiannian Yao , Journal of Materials Chemistry , J. Mater. Chem., 2007, 17, 4547-4557 30.Xu N, SunM, Cao YW, et al. Influence of pH

97.  聚亞醯胺-奈米金複合光學薄膜之製備及其微影製程技術

劉育憲; LIU, YU-SHIEN ,  2011
[化學工程與材料工程學系暨研究所] 學位論文
/titania-silica hybrid materials” Mater. Sci. Eng. C 22 (2002) 61-65. [13] Z. M. Liang, J, Yin, J. H. Wu, Z. X. Qiu, F. F. He, “Polyimide

98.  以改進式共沉澱法製備硬磁性鐵酸鋇

朱婉婷; Chu, Wan-Ting ,  2012
[化學工程與材料工程學系暨研究所] 學位論文
materials were used: an aqueous solution of ferric and barium nitrates, in a stoichiometric ratio to form BaFe12O19, as starting solution, ammonium

99.  太陽能驅動不同薄膜蒸餾模組海水淡化系統之成本與操作度比較

洪浩嘉; Hung, Hao-Chia ,  2014
[化學工程與材料工程學系暨研究所] 學位論文
, B.L.; Sane, M.G.; Parjane, S.B.; Guddad, M.. “Reverse Osmosis andMembrane Distillation for Desalination of Groundwater: A Review”, ISRN Materials

100.  使用掃流微過濾結合活性碳吸附在海水淡化前處理中去除微生物與有機物質

林筠喬; Lin, Yun-Chiao ,  2014
[化學工程與材料工程學系暨研究所] 學位論文
with activated carbon adsorption for removal of microbes and organic materials in the pretreatment of seawater desalination 掃流微過濾;海水淡化前處理;活性碳;吸附;cross-flow

101.  以靜電力場輔助電鍍法製備具微米構形電致色變薄膜及其性質之研究

廖禮君; Liao, Li-Chun ,  2014
[化學工程與材料工程學系暨研究所] 學位論文
.; Cheng, J.; Goodenough, J.B. “Prussian blue: a new framework of electrode materials for sodium batteries”,Chem. Commun.2012,48, 6544. 25.Kashiwazaki, N

102.  聚(氮-異丙基丙烯醯胺-乙烯胺-氮-異丙基丙烯醯胺)嵌段共聚物之合成與其環境應答性質

楊祖愷; Yang, Tsu-Kai ,  2016
[化學工程與材料工程學系暨研究所] 學位論文
of Biomedical Materials Research, 2000. 52(4): p. 577-586. 20. Gao, X., Cao, Y., Song, X., Zhang, Z., Xiao, C., He, C., and Chen, X., pH-and thermo-responsive

103.  粒徑與流體黏度對微過濾特性之影響

林宥良; Lin, Iou-liang ,  2009
[化學工程與材料工程學系暨研究所] 學位論文
. Green, “The Role of Porosity in Filtration VX: Skin Effect with Highly Compressible Materials”, A.I.Ch.E. J., 19, 1266 (1973). Wakeman, R

104.  氯化銅對PVDF以氯化亞銅催化原子轉移自由基聚合接枝PMMA的反應之影響

古訓銀; Gu, Shun-yin ,  2008
[化學工程與材料工程學系暨研究所] 學位論文
. 10(12), 901. 6. K. Matyjaszewski and J. Pyun, Chemistry of Materials, 2001, 13(10), 3436. 7. T. Otsu and M. Yoshida, Makromol. Chem. Rapid. Commun

105.  綠色化學之設計與整合 : 個案研究

張創堯; Chang, Chuang-yao ,  2009
[化學工程與材料工程學系暨研究所] 學位論文
-carbonylation) as raw materials to produce Carbaryl and dimethyl carbonate are excellent reaction path. In the second case study of DMC, we also use pinch

106.  感光性有機-無機奈米複合材料的製備與其於光學鍍膜之應用

黃逢璽; Huang, Feng-hsi ,  2010
[化學工程與材料工程學系暨研究所] 學位論文
of direct dye grafted onto the silica surface is better than blend. The modified dye-g-silica hybrid materials are added into optical coating to prevent

107.  用水旋風分離器分離酵母菌懸浮液之分離性能

黃敏哲; Hwang, Min-Jhe ,  2014
[化學工程與材料工程學系暨研究所] 學位論文
, that is quite short. The order of the particle mean diameter with those materials are：grass particle> activated sludge> yeast powder, therefore

108.  中空二氧化矽奈米粒子表面改質及其在塑膠基板上製作高穿透高疏水複合塗膜

王建翰; Wang, Chien-Han ,  2016
[化學工程與材料工程學系暨研究所] 學位論文
Materials, 2016. 227: p. 121-136. 13. D.Ebert, B. Bhushan, Transparent, superhydrophobic, and wear-resistant coatings on glass and polymer substrates

109.  Analysis on hydrodynamics and cake formation of dynamic microfiltration with different rotating-disk designs

吳思恩; Wu, Su-En ,  2017
[化學工程與材料工程學系暨研究所] 學位論文
, J.M., Piar, G., 1996. Modeling of solid/liquid expression for cellular materials. AIChE J. 42, 2057. Lee, S.S., Burt, A., Russoti, G., Buckland, B

110.  以有機膠奈米模板合成高分子之結構與性質研究

曾珅鎮; Tseng, Shen-jhen ,  2009
[化學工程與材料工程學系暨研究所] 學位論文
DVB濃度上升，其孔洞平均尺寸隨之下降，因此，其比表面積變化隨DVB濃度上升而上升。 We describe the preparation of nanostructured polymeric materials by polymerizing a monomer within