121.  含顏料或奈米二氧化矽之紫外光硬化型或是溼氣硬化型PU樹脂製備和塗裝應用

徐為宬; Hsu, Wei-chen ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Materials, 2, 114 (1999) 18. 黃景忠，紫外光硬化型PU / 二氧化矽奈米複合材料於表面塗裝 之應用，淡江大學碩士論文，2007 19. 張豐志 編著，應用高分子手冊；五南出版社，2003 20. J. Szmuszkovicz, M. P. Kane, L. G

122.  銅在磷酸溶液中之電化學平坦化機制

戴振家; Tai, Chen-chia ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
for VLSI Applications in 1990, eds., G. C. Smith and R. Blumenthal, MRS, Pittsburgh, 179 (1991). Murarka, S. P., Materials Science and Engineering, 87

123.  凝膠衍生穩定化氧化鋯之製備與特性分析

李柏澍; Li, Po-shu ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. “Solid Oxide Fuel Cell Materials“ Fuel Cell Catalyst Vol . 2, No. 3, Spring 2002. 8. 汪建民主編, “陶瓷技術手冊,” 中華民國產業技術發展協會, 中華民國粉末冶金協會出版, 1994. 9. I

124.  利用熱與物質併合交換器之蒸餾塔

潘保儒; Penn, Pao-ru ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
and Advanced Materials, University of Newcastle Upon Tyne, UK, 2003. Zarkadas, D. M. and K. K. Sirkar, “Polymeric Hollow Fiber Heat Exchangers

125.  以有機膠奈米模板合成PS/PMMA共聚物之結構與性質研究

趙禹昇; Chao, Yu-sheng ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
到奈米細纖維被去除的痕跡。 This research focus on preparation of nanostructured polymeric materials by polymerization at monomers within a scaffold composed

126.  以流體力學方法提昇稻稈水解液中糖類的膜過濾效率

蔡鴻源; Tsai, Hung-Yuan ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
of an integrated photocatalysis/hollow fiber microfiltration system for the removal of trichloroethylene in water” , Journal of Hazardous Materials 152, 183

127.  旋風分離器於廢棄積體電路粉末之金回收

陳峒諺; Chen, Tung-Yen ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, Journal of Hazardous Materials, 168, 567–590. 5.Hararah M.A., Endres E., Dueck J., Minkov L. , Neesse T.(2010), “ Flow conditions in the air core

128.  製備光可調控溫度敏感型複合載體以作為藥物控制釋放系統

林昱伸; Lin, Yu-Shen ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. A. (2009). Gold nanorods: From synthesis and properties to biological and biomedical applications. Advanced Materials, 21(48), 4880-4910. 28. Liu, M

129.  鉑-二氧化鈦碳甲醇氧化電催化劑之製備與最佳化

陳俞安; Chen, Yu-An ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Sources 2001, 102, 172-177. 42. “Fabrication and Characterization of Pt/C-TiO2 Nanotube Arrays as Anode Materials for Methanol Electrocatalytic

130.  以靜電場輔助電鍍具微米構形普魯士藍薄膜之研究

丁坤億; Ding, Kuen-Yi ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. “Microporous and mesoporous materials”, Adv. Mater. 2002, 14, 629–638. [6] Brinker, C. J. “Porous inorganic materials”, Curr. Opin. Solid State Mater. Sci. 1996

131.  鉑二氧化矽-碳黑甲醇氧化電催化劑之製備與性質分析

葉如玉; Yeh, Ju-Yu ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
) nanoparticles. Then, SiO2 nanoparticles mix carbon black to obtain (SiO2)xCy nanocomposite materials as new supports of the electrocatalyst and adjusting

132.  以離心過濾純化微生物/蛋白質雙成份懸浮液中之蛋白質

周揚震; Chou, Yiang-chen ,  2006
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Jensen, “Sedimentation of Compressible Materials : Analysis of Batch Sedimentation Curve,” Powder Technology, 11, 75-84 (1975) Hwang, K. J., Y. C

133.  掃流微過濾之薄膜表面受力分析與阻力模擬

李國禎; Li, Kuo-jen ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, T.C. “The Role of Porosity in Filtration. IX. Skin Effect with Highly Compressible Materials,” A.I.Ch.E. J., 19, 1266-1269 (1973). Vasseur, P. and Cox

134.  回流與雙行程效應對薄膜質量交換器效率之影響

潘建泓; Pan, Jian-hung ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
] L.M. Robeson, Polymer membranes for gas separation, Current Opinion in Solid State and Materials Science 4 (1999) 549. [13] 謝治政, 中空纖維膜技術簡介, 化工資訊, 16, 7

135.  幾丁聚醣選擇性接枝聚氮-異丙基丙烯醯胺的合成及其酸鹼/溫度敏感性質研究

周書仲; Chou, Shu-chung ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
on Intelligent Materials, Technomic Publishing Co., Inc.:Lanaster,PA Terbojevich M, Cosani A, Focher B, Marsano E. (1993). High-performance gel-permeation

136.  共沉澱法製備LaAlO3粉體與粉體性質分析

程冠博; Cheng, Kuan-po ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Fu, F. Tietz, P. Lersch, D. Stöver, “Evaluation of Sr- and Mn-substituted LaAlO3 as potential SOFC anode materials”, Solid State Ionics 177

137.  軟膠體之壓縮及微過濾機構之研究

王雅婷; Wang, Ya-ting ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
with Highly Compressible Materials”, A.I.Ch.E. J., 19, 1266 (1973). Tiller, F.M., J.R. Cramp and F. Ville, “A Revised Approach to the Theory of Cake

138.  壓克力-奈米金與環氧樹脂壓克力-奈米金奈米複合材料之製備與性質研究

陳霈桓; Chen, Pei-huan ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
in the nanocomposite or thin film and the effects of nanogold on the structures and properties of the polymers in order to increase the application range. From

139.  觸媒反應器之計算流體力學模擬

陳逸明; Chen, Yi-ming ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
., 32, pp. 1839-1852, 1993. Leitão, A. and A. Rodrigues, “Catalytic processes using “large-pore” materials: effects of the flow rate and operating

140.  以聚麩胺酸鹽製備奈米金及其對聚胜肽結構之影響研究

陳景弘; Chen, Jin-hong ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
-Guang Yu, Wen-Ching Lin, Chien-Hong Lin, Li-Mei Changb, Ming-Chien Yang , Materials Chemistry and Physics 101 (2007) 93–98. 46. Wen-Ching Lin, Ming

141.  非對稱管壁熱通量之迴流型二行程平板式熱交換器的熱傳之研究

陳衛樽; Chen, Wei-zun ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
of methanol over HZSM-5, Microporous and Mesoporous Materials 29 (1-2) (1999) 127-144. 11.A. Couvert, M.Roustan, P. Chatellier, Two-phase hydrodynamic

142.  以AOT 逆微胞系統製備有機凝膠及二氧化鈦奈米粒子之結構與性質研究

賴柏翔; Lai, Po-hsiang ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. John, G. L. McPherson, D. K. Schwartz, R. Moore, J Am Chem Soc, 123, 2414 (2001). 38. M. S. Lee, G. D. Lee, C. S. Ju, S. S. Hong, Solar Energy Materials

143.  固態硼氫化鈉錠穩定釋氫之動態特性研究

廖偉宇; Liao, Wei-Yu ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
,” Journal of Power Sourses, 145, 21-19, 2005. Sakintuna, B., Lamari-Darkrim, F., Hirscher, M.. “Metal hydride materials for solid hydrogen storage

144.  太陽能驅動薄膜蒸餾海水淡化系統之設計與可操作度分析

張舜傑; Chang, Shun-Chieh ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
edition; 2009. Crook P, Caruso ML, Kingseed DA. Corrosion resistance of a new, wrought Ni-Cr-Mo alloy. Materials Selction & Design 1997;36:49-52

145.  凝膠衍生(PSi)-TiO2膜光電性質的研究

王昶文; Wang, Chang-Wen ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
-incorporated TiO2 materials.” J. Ind. Eng. Chem., 16, 906-911(2010). 32. A. Kitiyanan, S. Ngamsinlapasathian, S. Pavasupree, S.Yoshikawa

146.  史特靈引擎之模擬與設計

陳宗成; Chen, Zong-Cheng ,  2013
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials, Washington, U.S. Dept. of Commerce, National Bureau of Standards, 1966. Ranjbarkohan, M., Rasekh, M., Hoseini, A.H., Kheiralipour, K., Asadi

147.  太陽能驅動史特靈引擎之模擬研究

周盈秀; Chou, Ying-Hsiu ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
materials, Washington, U.S. Dept. of Commerce, National Bureau of Standards, 1966. Rajbarkohan, M., Rasekh, M., Hosani, A.H., Asadi, M.R., “Kinamtics

148.  設計溢流管結構以提升水旋風分離器之分離效率

周詩評; Chou, Shih-Ping ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
the experimental section. First, using the USA Fluent software package by governing equations to calculate the materials and balance and momentum balance

149.  結合凝聚程序與活性碳動態膜於掃流微過濾以應用於海水淡化前處理

鄭喬維; Cheng, Chiao-Wei ,  2015
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, the flux declined dramatically at the beginning of filtration, the major resistance sources were those organic materials adsorbed and captured in PAC

150.  製備顆粒型聚偏二氟乙烯薄膜及薄膜蒸餾之應用

楊承道; Yang, Cheng-Dau ,  2015
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
of the thermal phases in firing of kaolinite to mullite by using micro-Raman spectroscopy and curve-fitting, Optical Materials. 34 (2) (2011) 404-409. 30

151.  利用環境敏感性嵌段共聚物與幾丁聚醣自組裝形成奈米藥物釋放載體

林莉婕; Lin, Li-Jie ,  2015
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Toit. Stimuli-responsive polymers and their applications in drug delivery. Biomedical Materials 2009;4:022001. [14] Ashammakhi N, Reis R, Chiellini E

152.  二苯亞甲基山梨醇添加於環氧樹脂中之結構與性質研究

夏瑞懿; Hsia, Ruey-Yi ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
dioxide composites as solid–liquid phase change materials'', Applied Energy, 86 (2009), 170–174. [53]Mohamed Youssry , Luigi Coppola , Isabella

153.  研發沉浸式薄膜過濾系統以去除海水中之結垢物質

蔡雅倫; Cai, Ya-Lun ,  2016
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
at the beginning of filtration, the major resistance sources werethose organic materials fouling on themembranes.Comparing the performances of different

154.  共射成型中材料黏度差異性對皮層/芯層界面之影響

陳城煌; Chen, Cheng-Huang ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
molding. SPE ANTEC, 2016. [25] 張榮語, 射出成型模具設計–操作實務. 高立圖書有限公司, 1995. [26] Strong, A.B., Plastics Materials and Processing. [27] 魏綸群, 塑膠射出成型製程時間最佳化設計, in 機械

155.  負載於碳黑上鈀-鈷奈米合金氧氣還原反應電催化劑之製備與性質分析

鍾弼合; ZHONG, BI-HE ,  2017
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
as oxygen reduction electrocatalysts and their enhanced activity and stability with monolayer Pt decoration," Chemistry of Materials 24, 2012, 2274-2281

156.  PHB與改質水溶性澱粉摻合體的製備與性質

鍾政裕; Chung, Cheng-yu ,  2005
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
OF MATERIALS SCIENCE , v.35 , P. 523~545 5. C.S.K. Reddy, R. Ghai, Rashmi, V.C. Kalia (2003) , Polyhydroxyalkanoates an overview, Bioresource Technology

157.  多孔型聚偏二氟乙烯薄膜固定離胺酸與己二胺

張旭賢; Chang, Hsu-hsien ,  2005
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, “On the formation of macrovoids in PMMA membranes”, J. Membr. Sci. 155, 31 (1999) 34. K. Kamide and S. Mannabe, in: D. Lloyd (Ed.), “Materials science of synthetic

158.  以電鍍銅法製備薄膜式氮化鎵發光二極體元件及其應力分析

吳仕勤; Wu, Shin-Chin ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. Mech. Phys. Solids, vol. 44, no. 5, PP. 657473 (1996) [14] M. Ohring “The Materials Science of Thin film” ACADEMIC. PRESS, INC. San Diego, pp. 419

159.  以熱及非溶劑雙重誘導相分離法製備EVOH薄膜

蘇彥霖; Su, Yan-Lin ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, Effect of kind of membrane materials on membrane fouling with BSA, J. Membr. Sci. 384 (2011) 157-165. [10] Y.C. Li, Y.T. Liao, H.H. Chang, T.H. Young

160.  以聚苯胺及三氧化鎢薄膜搭配丁二腈聚乙二醇固態電解質組裝可撓式互補型電致色變元件及其性質研究與效能最佳化

陳恩; Chen, En ,  2014
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
,”Electrochromic materials and devices: present and future”,Mater.Chem. Phys. 77 (2002) 117. 32.R. Murugesan, E. Subramanian,”Effect of organic dopants

161.  微粒子/牛血清蛋白雙成份懸浮液之沉浸式薄膜過濾

羅鴻彬; Lo, Hung-pin ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
Substrate Materials. ”, Polymer Journal 35 (12), 929-937(2003) Kim, S. H., S. Y. Moon, C. H. Yoon, S. K. Yim and J. W. Cho, “Role of Coagulation

162.  凝膠衍生TiO2粉體與薄膜之光催化及光電性質探討

胡發鈞; Hu, Fa-chun ,  2009
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
編著，奈米材料導論，學富文化事業公司，(2002)。 10. D. V. Bavykin, J. M. Friedrich, and F. C. Walsh, “Protonated Titanates and TiO2 Nanostructured Materials: Synthesis

163.  沉浸式薄膜過濾中粒子附著機構之研究

陳祥嘉; Chen, Hsiang-chia ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
. 115-119, 1996. Kim, J., Cho, J., Ryba, E., Bai, J., “Interfacial Structures of Polyurethane Thin Films on Various Substrate Materials. ”, Polymer

164.  奈米粒子改質型彩色光阻之製備及性質探討

李志剛; Lee, Chih-kang ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
of Materials, 1, 572 (1989). 16. H. Huang, B. Orler, G. L. Wilkes; Macromolecules, 20, 1322 (1987). 17. 林唯芳，材料科技與產業資訊第七卷第五期，p12 (2000)。 18. K. Y. Qui

165.  逆洗對沈浸式薄膜過濾性能之影響

詹智勝; Chan, Chih-sheng ,  2007
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, J., “Interfacial Structures of Polyurethane Thin Films on Various Substrate Materials. ”, Polymer Journal 35 (12), 929-937(2003) Kim, J. S., C. H. Lee

166.  迴流效應於非對稱質量通量之二行程平板式層狀逆流型質量交換器效率改善之研究

李博鈞; Lee, Po-chun ,  2008
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
and the co-feeding of olefins and water on the conversion of methanol over HZSM-5, Microporous and Mesoporous Materials 29 (1-2) (1999) 127-144. 26. A.H.

167.  凝膠衍生P/Si-TiO2薄膜之相穩定性與光催化性質

陳立訓; Chen, Li-hsun ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
). 12. N. Serpone, “Brief introductory remarks on heterogeous photocatalysis,” Solar Energy Materials and Solar Cells 38, 369-379 (1995). 13. B. Sun

168.  非對稱固定壁濃度二行程平板型質量交換器效率改善之研究

郭奇縉; Kuo, Chi-jin ,  2010
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
, Microporous and Mesoporous Materials 29 (1-2) (1999) 127-144. 31. A.H. Fakeeha, B.Y. Jibril, G. Ibrahim, A.E. Abasaeed, Medium effects on oxygen mass

169.  光可調控溫度敏感型聚氮異丙基丙烯醯胺高分子的製備及其細胞相容性

張耿銘; Zhang, Geng-Ming ,  2011
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
) 22192-22200. 32. L. M. Liz-Marzán, Nanometals: Formation and color, Materials Today 7 (2004) 26-31. 33. J. Turkevich, P. C. Stevenson, J. Hillier, A study

170.  酵母菌在藻酸鈣晶球上之固定化及其恆壓過濾特性

蘇炳元; Su, Ping-Yuan ,  2012
[Graduate Institute & Department of Chemical and Materials Engineering] Thesis
cellulose acetate (MCE) membranes with mean pore sizes of 0.025 μm and 0.1 μm, and Whatman #2 filter paper. The effects of suspension materials