Simulation of Bicycle Helmet Impact Test Based on the CPSC Standard

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/81351

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/81351

题名:	Simulation of Bicycle Helmet Impact Test Based on the CPSC Standard
作者:	Teng, Tso Liang;Liang, Cho Chung;Shih, Chien Jong;Nguyen, Van Hai
贡献者:	淡江大學機械與機電工程學系
关键词:	Bicycle Helmet;Consumer Product Safety Commission;Headform;Impact Test;Simulation
日期:	2012-09
上传时间:	2013-03-11 10:21:28 (UTC+8)
出版者:	Trans Tech Publications Inc.
摘要:	Bike helmets must meet minimum standards of construction and materials design. This paper focuses on assessment of a helmet based on the shock absorbing test of CPSC’s standard. Computer simulation finite element model is an economical and time-efficient alternative to physical testing. By those compelling reasons, a finite element model of helmeted headform is constructed to serve for development of bicycle helmet technologies. This study performs finite element analyses of helmet impact tests using LS-DYNA software. The linear accelerations at center of gravity of the headform are measured in this simulation. This study implies that the numerical method is a practical approach to helmet design problems. Furthermore, the helmet test model proposed here has potential for guiding the future development of helmet technologies.
關聯:	Advanced Materials Research 538-541, pp.744-747
DOI:	10.4028/www.scientific.net/AMR.538-541.744
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	17	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章