Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structures

doi:10.1016/j.applthermaleng.2012.10.035

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/79031

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/79031

题名:	Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structures
作者:	Chen, Yu-tang;Kang, Shung-wen;Hung, Yu-hsun;Huang, Chun-hsien;Chien, Kun-cheng
贡献者:	淡江大學機械與機電工程學系
关键词:	heat pipe;vapor chamber;aluminum;phase change
日期:	2013-03
上传时间:	2012-11-21 16:52:45 (UTC+8)
出版者:	Kidlington: Pergamon
摘要:	Vapor chambers are used for spreading and heat transfer because of phase change phenomena. In general, vapor chambers are made of high-conductive metal, such as copper. Aluminum is abundant element, and has low cost. The advantage of aluminum is that it is light, bendable, and easy to shape. The authors studied the feasibility of an aluminum vapor chamber to provide more low cost devices. Aluminum alloy 6061 was used as the container material to fabricate the aluminum vapor chamber with the radial grooved wick and sintered aluminum powders wick. Two types of aluminum vapor chambers were fabricated, both of which had the same dimensions of 58 mm x 58 mm x 6 mm; the working fluid was acetone. This study compared various charging amounts, and evaluated thermal resistance and temperatures at the bottom of the heat sink. A comparison of the two types of wick designs revealed that the thermal resistance of sintered aluminum powders vapor chamber was more stable than radial grooved.
關聯:	Applied Thermal Engineering 51(1-2), pp.864–870
DOI:	10.1016/j.applthermaleng.2012.10.035
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structures.pdf		1421Kb	Adobe PDF	1	检视/开启
index.html		0Kb	HTML	360	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....