English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 54043/88873 (61%)
造訪人次 : 10548574      線上人數 : 17
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/79031

    題名: Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structures
    作者: Chen, Yu-tang;Kang, Shung-wen;Hung, Yu-hsun;Huang, Chun-hsien;Chien, Kun-cheng
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: heat pipe;vapor chamber;aluminum;phase change
    日期: 2013-03
    上傳時間: 2012-11-21 16:52:45 (UTC+8)
    出版者: Kidlington: Pergamon
    摘要: Vapor chambers are used for spreading and heat transfer because of phase change phenomena. In general, vapor chambers are made of high-conductive metal, such as copper. Aluminum is abundant element, and has low cost. The advantage of aluminum is that it is light, bendable, and easy to shape. The authors studied the feasibility of an aluminum vapor chamber to provide more low cost devices. Aluminum alloy 6061 was used as the container material to fabricate the aluminum vapor chamber with the radial grooved wick and sintered aluminum powders wick. Two types of aluminum vapor chambers were fabricated, both of which had the same dimensions of 58 mm x 58 mm x 6 mm; the working fluid was acetone. This study compared various charging amounts, and evaluated thermal resistance and temperatures at the bottom of the heat sink. A comparison of the two types of wick designs revealed that the thermal resistance of sintered aluminum powders vapor chamber was more stable than radial grooved.
    關聯: Applied Thermal Engineering 51(1-2), pp.864–870
    DOI: 10.1016/j.applthermaleng.2012.10.035
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文


    檔案 描述 大小格式瀏覽次數



    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋