淡江大學機構典藏:

Collection

	Journal Article [1538/1627]
	Proceeding [709/1718]
	Monograph [22/30]
	Chapter [6/9]
	Research Paper [100/337]
	Thesis [398/418]
	Patent [6/18]
	Audio Visual Work [0/1]
	Others [3/6]

Siblings

	Graduate Institute & Department of Architecture [1020/1782]
	Graduate Institute & Department of Civil Engineering [1576/2986]
	Graduate Institute & Department of Water Resources and Environmental Engineering [1528/2618]
	Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering [2331/3405]
	Graduate Institute & Department of Electrical Engineering [3390/5123]
	Graduate Institute & Department of Computer Science and Information Engineering [3154/4585]
	Graduate Institute & Department of Aerospace Engineering [1108/1844]
	Department of Artificial Intelligence [71/89]

Community Statistics

	Item counts issued in 3 years: 102(2.45%)
	Items With Fulltext: 2782(66.83%)
Download counts of the item
	Download times greater than 0: 2774(99.71%)
	Download times greater than 10: 2762(99.28%)
	Total Bitstream Download Counts: 888722(3.91%)

Last Update: 2025-05-29 04:45

Top Upload

Top Download

Recent Submissions

	Direct synthesis of formic acid via...
	美國碳中和發展現況
	A photovoltaic-electrolysis system ...
	Performance Analysis of DCMD Module...
	Kinetics-based activation energy of...
	Analysis of CO2 absorption in gas/l...
	不同紊流促進器於板式和管式薄膜接觸器模組中之二氧化碳吸收率分析
	純鈦微弧氧化塗層銀離子與氧氣電漿處理及接枝感溫性水膠用於增強骨整合及抗...
	應用低溫及常壓電漿於醫用不鏽鋼表面處理並接枝感溫性水膠吸附稀土鑭之抗...
	以UV光接枝次微米幾丁聚醣-丙烯酸-玉米醇溶蛋白功能性水膠之製備與性質...

Jump to: [Chinese Items] [0-9] [ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ]

or enter the first few letters:

Showing items 2051-2075 of 4162. (167 Page(s) Totally)
<< < 78 79 80 81 82 83 84 85 86 87 > >>
View [10|25|50] records per page

Date	Title	Authors
2022-06-14	Study on Machine identification and its effect on the RSM Optimization in Injection Molding	Xu, Rui-Ting; Wang, Tsung-Han; Huang, Chao-Tsai (CT); Chen, Po-Hsuan; Jong, Wen-Ren; Chen, Shia-Chung; Hsu, David; Chang, Rong-Yeu*
2022-06-14	Study on Machine identification and its effect on the RSM Optimization in Injection Molding.	Xu, Rui-ting; Wang, Tsung-han; Huang, Chao-tsai; Chen, Po-hsuan; Jong, Wen-ren; Chen, Shia-chung; Chang, Rong-yeu; Hsu, David
2009-11-20	A Study on Membrane Fouling in Submerged Membrane Filtration of Fine Particles	黃國楨; Hwang, Kuo-jen; Chen, H.C.; Wang, C.Y
2005-11	Study on performance enhancement for ammonia-water absorption heat pump using membrane devices	張煖; Chang, H.; Chen, Siang-ru
2006-09-29	A Study on Protein Fouling in Submerged Membrane Filtration System	鄭東文
2017-01-13	Study on Silver Nanostructures by Polyol Process Syntheses, Mechanism, and Applications	Chen, Pei-Wen; Chiu, Wen-Yen; Kuo, Chih-Yu; Yang, Wen-Shan; Don, Trong-Ming; Lee, Chia-Fen
2001-09	Study on the absorption and foaming with carbon dioxide of plastics	Lin, Gwo-geng; Wang, Li-june
2005-11	Study on the CO2 Gas Absorption System Using Hollow Fiber Membrane Module	張煖; Chang, H.; Wu, Ching-hung
2008-07-11	The Study on the Conductivity, Dielectric Properties and Miscibility of PEG/PLLA Blends	Yeh, Ho-ming; 葉和明
2021-05-31	STUDY ON THE DEGREE OF ASSEMBLY FOR INJECTED COMPONENTS IN A MULTI-CAVITY MOLD SYSTEM	Lin, Tsai-Wen; Huang, Chao-Tsai (CT); Jong, Wen-Ren; Chen, Shia-Chung
2020-05-05	Study on the Design-induced Fiber Orientation and Their Influences on Warpage in Injection Fiber Reinforced Plastic (FRP) Parts	Chu, Jia-Hao; Huang, Chao-Tsai (CT); Hsu, Chia; Fu, Wei-Wen; Hwang, Sheng-Jye
2020-05-05	STUDY ON THE DESIGN-INDUCED FIBER ORIENTATION AND THEIR INFLUENCES ON WARPAGE IN INJECTION FIBER REINFORCED PLASTIC (FRP) PARTS	Chu, Jia-Hao; Huang, Chao-Tsai (CT); Hsu, Chia; Fu, Wei-Wen; Hwang, Sheng-Jye
2019-12-18	Study on the Deviation and Internal Mechanism between Numerical Simulation and Experiments in Injection Molding Product Development	Huang, Chao-Tsai; Chen, Yi-Hsuan Hsu Po-Hsuan; Jong, Wen-Ren
2019-10-30	Study on the deviation between numerical simulation and experiments and Its Influence in injection molding using Design of Experiments (DOE) Method	Chen, Po-Hsuan; Xu, Rui-Ting; Huang, Chao-Tsai (CT); Jong, Wen-Ren; Chang, Rong-Yeu
2019-10-29	Study on the Difference of Viscoelastic Behavior Between General and Fiber Reinforced Thermoplastics in Compression Molding System	Huang, Chao-Tsai; Lee, Po-Yi; Chen, Ling-Jue; Wang, Chih-Wei; Hsu, David; Chang, Rong-Yeu
2011-11-25	Study on the Double-Pass Heat Transfer through a Parallel-Plate Device with Internal Reflux for Power-Law Fluid	林國賡; 陳昱如
2009-11-28	Study on the dynamics and control for the solar powered membrane distillation desalination system	張煖; Chang, H.; Wang, G.-B.; Li, C.-C.
2013-11-22	A study on the effects of guidance-channel inlet on hydrocyclone performances	Hwang, Kuo-Jen; Chou, Shih-Ping; 黃國楨
2014-06-01	A Study on the Effects of Siloxane Derivatives as Co-adsorbents on the Performance of Dye-Sensitized Solar Cells	林正嵐
1989-01-01	A study on the enrichment of heavy water by thermal diffusion	葉和明; Yeh, Ho-ming
2016-07-27	Study on the Fiber Breakage History through a Barrier Structure Screw in Injection Molding	Huang, Chao-Tsai (C.T.); Tseng, Huan-Chang; Chang, Rong-Yeu; Hwang, Sheng-Jye
2023-10-19	Study on the fiber orientation variation due to bubble effect in fiber reinforced microcellular injection molding	Huang, Chao-tsai
2023-04-28	Study on the Flow, Foaming Characteristics and Structural Strength of Polypropylene Structural Foam Injection Molding by Innovative Nitrogen and Molten Plastic Mixing Mechanism	Huang, Chao-tsai
2021-05-13	STUDY ON THE FLOW-FIBER COUPLING EFFECT AND ITS INFLUENCE ON THE SHRINKAGE OF FIBER-REINFORCED PLASTIC (FRP) INJECTION PARTs	Lai, Cheng-Hong; Huang, Chao-Tsai (CT); Chu, Jia-Hao; Fu, Wei-Wen; Hwang, Sheng-Jye; Peng, Hsin-Shu; Wu, Chih-Che; Tu, Chun-I
2023-10-12	Study on the growth mechanisms of Cu‑In compounds at the Sn52In/Cu interface	Wang, Yi‑wun