A novel design for a burn-in system

doi:10.1166/asl.2012.2472

淡江大學機構典藏 > 工學院 > 電機工程學系暨研究所 > 期刊論文 > Item 987654321/78136

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/78136

题名:	A novel design for a burn-in system
作者:	Li, Shin-an;Chiang, Jen-shiun;Liu, Ta-kang;Chen, Kuang-yuan;Wong, Ching-chang
贡献者:	淡江大學電機工程學系
关键词:	BURN-IN TEST;FUZZY CONTROL;INTEGRATED CIRCUIT TEST;PI CONTROL
日期:	2012-04-15
上传时间:	2012-09-04 13:48:56 (UTC+8)
出版者:	American Scientific Publishers
摘要:	Burn-in test is helpful to improve the reliability of Integrated Circuit (IC). It can screen the early failures of the IC and get a good quality. When the IC technology enters deep sub-micron technologies, the increased standby leakage current will cause the higher junction temperature. The high junction temperature in the CMOS circuit may lead to thermal runaway and yield loss during burn-in test. It is a challenge to keep a uniform temperature in the burn-in system. In this paper, a modified burn-in socket and a fuzzy control structure are proposed to solve the non-uniform temperature in the burn-in system. First, a burn-in socket, which has a heater to raise the temperature and a fan to lower the temperature, is proposed and implemented. Using the modified socket, every Device Under Test (DUT) has its own temperature control system. Then, a fuzzy control structure is proposed to control the heater and fan to adjust the temperature of the DUT. From the experiment, the implemented burn-in system has a fast response time and an excellent dynamic balancing.
關聯:	Advance Science Letters 8, pp.106-111
DOI:	10.1166/asl.2012.2472
显示于类别:	[電機工程學系暨研究所] 期刊論文

文件中的档案:

没有与此文件相关的档案.

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....