液體霧化對流場表現之影響

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 學位論文 > Item 987654321/77464

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/77464

题名:	液體霧化對流場表現之影響
其它题名:	Atomized liquid affect the performance of the flow field
作者:	王孝瑄;Wang, Hsiao-hsuan
贡献者:	淡江大學機械與機電工程學系碩士班李宗翰;Lee, Tzung-hang
关键词:	蝕刻;平面蝕刻加工;汰換率;表面加工;平板蝕刻;噴流;流場;壓力;流量;水坑效應;Etching;Surface etching process;Replacement of rate;Surface treatment;Etching plate;Jet;Flow field;Pressure;flow;Puddle effect
日期:	2012
上传时间:	2012-06-21 06:47:33 (UTC+8)
摘要:	近年來大面積平面蝕刻加工越來越廣泛，隨著平面蝕刻加工面積的變大，產生許多蝕刻速率不均等的現象，本文著重在討論使用均流霧化噴頭進行汰換率增加的噴流，所造成之流場之變化，與其變化之克服。本文之中先進行了該實驗器具的可重複性測試，在接下來進行出口與進口端的比較，在固定高度下改變壓力與流量時，其改變所影響之相對關係，最後就當流場之受到霧化噴流撞擊時所發生之現象與其深度進行測量，使其增加液體汰換率時也不會使得噴流直接撞擊工件表面，造成工件表面液壓不均狀態，以便解決大面積平面蝕刻時所發生的流場汰換率不均以及流場表面壓力不均之問題。 In recent years, large areas of flat etching process more and more widely, with the surface area of the larger etching process, resulting in many uneven etching rate of the phenomenon, this article focuses on using both the atomization nozzle flow rate of increase in jet replacement of the field caused by the change of his ilk, and their change of overcoming. This was the first among the experimental reproducibility of the test apparatus, for exports and imports in the next side of the comparison, at a fixed height to change the pressure and flow, its relative impact of changes in the relationship, and finally when the flow field of the subject spray jet crash that occurred when the depth of the phenomenon and its measurement, the liquid to increase the replacement of rate will not make a direct impact jet surface, resulting in uneven surface hydraulic state, in order to solve large-scale surface etching occurs when the replacement of rate of flow field and flow field uneven surface uneven pressure of the problem.
显示于类别:	[機械與機電工程學系暨研究所] 學位論文

文件中的档案:

档案	大小	格式	浏览次数
index.html	0Kb	HTML	230	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....