Effect of the milling solution on lead stabilization in municipal solid waste incinerator fly ash during the milling processes

doi:10.1016/j.wasman.2010.04.020

淡江大學機構典藏 > 工學院 > 水資源及環境工程學系暨研究所 > 期刊論文 > Item 987654321/77243

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/77243

題名:	Effect of the milling solution on lead stabilization in municipal solid waste incinerator fly ash during the milling processes
作者:	Sun, Chang-jung;Li, Ming-guo;Gau, Sue-huai;Chuang, Chia-jung
貢獻者:	淡江大學水資源及環境工程學系
日期:	2011-02
上傳時間:	2012-06-14 09:11:45 (UTC+8)
出版者:	Kidlington: Pergamon
摘要:	The wet milling process had been found to effectively stabilize lead in flyash. This study adopts this method and looks at the effect of different millingsolutions to improve the efficiency of leadstabilization. Different millingsolutions (water, phosphoric acid and ethanol) and different milling times (1, 24, 48 and 96 h) were selected as parameters. Since lead oxide can be identified by XRD in this experiment’s samples, 5% lead oxide was added to the extracted mixed flyash to make instrumental analysis easier. The experimental results indicate that the effect of stabilization of lead after milling could exceed 96%. During milling with water, considerable lead leached into the water in the initial stage (1 h) of the process, but a stable level was reached as the milling time increased. After milling with ethanol and 0.2 M phosphoric acids, the efficiency could exceed 93% after 1 h of milling time. The results of the sequential extraction procedure (SEP) results show that the residual fraction could be increased from 8.93% to 56.16% when a 0.2 M phosphoric acid solution was used. Clearly the choice of an appropriate millingsolution can enhance leadstabilization in the flyash.
關聯:	Waste Management 31(2), pp.318-324
DOI:	10.1016/j.wasman.2010.04.020
顯示於類別:	[水資源及環境工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
0956-053X_31(2)p318-324.pdf		713Kb	Adobe PDF	372	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....