淡江大學機構典藏:Item 987654321/76572
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62797/95867 (66%)
造訪人次 : 3746056      線上人數 : 594
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/76572


    題名: Effective thermal management of multiple electronic components
    作者: Yu, Chun-sheng;Kang, Shung-wen;Weng, Ming-tai
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: multiple heat sources;spreading thermal resistance;vapor chamber
    日期: 2010-10
    上傳時間: 2012-05-14 16:41:50 (UTC+8)
    摘要: The objective of this paper is to provide an effective and accurate analytical solution to compute the spreading thermal resistance of a vapor chamber thermal module, as well as the surface temperatures and the heat flux distributions at the heating surface. The analytical solutions are expressed in a reduced unit system with the governing parameters of the corresponding distance between heat sources, dimensionless plate thickness of the vapor chamber. This paper also presents vapor chamber temperature distribution, and it is correlation to heat source sizes, hence, spreading thermal resistance decreases with the increasing lateral length. There is the obvious difference between spreading thermal and conductive thermal resistance as lateral length is disproportion to heating area. Therefore, spreading thermal resistance is an important factor when design the thermal solution of a high density chipset power, and it caused high temperature in heat sources by embedded a thinner heat sink base. According to Fourier conductivity theorem, spreading thermal resistance is disproportion to sink base, then thermal resistance is not only parameter for vapor chamber module design, it needs to consider spreading resistance of vapor chamber and fin performance for cooling LEDs array, in order to prevent mismatch on numerical analysis and mathematical calculation. Thermal simulation is used as a design tool, and it is close to experimental data. The difference is within 5.9%, and it presents a precise result.
    關聯: Microsystems Packaging Assembly and Circuits Technology Conference (IMPACT), 2010 5th International, pp.1-4
    DOI: 10.1109/IMPACT.2010.5699602
    顯示於類別:[機械與機電工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    Effective Thermal Management of Multiple Electronic Components.pdf全文檔1408KbAdobe PDF536檢視/開啟
    index.html0KbHTML355檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋