淡江大學機構典藏:Item 987654321/76566
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62822/95882 (66%)
造訪人次 : 4028071      線上人數 : 658
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/76566


    題名: A novel copper bead heat sink for computer cooling
    作者: Tsai, Meng-Chang;Kang, Shung-Wen;Lin, Chih-Hsien
    貢獻者: 淡江大學電機工程學系
    關鍵詞: CPU cooler;Copper bead sink;Heat sink;Sinter sink
    日期: 2009-03
    上傳時間: 2013-03-07 14:56:20 (UTC+8)
    出版者: New York: Institute of Electrical and Electronics Engineers (IEEE)
    摘要: The power dissipation of CPU used in desktop computers has been steadily increasing with time. The tendency for a rise in the CPU capacity resulted at present in increasing heat release to 50-100W for desktop PC. The problem of the CPU cooling consists in restricting its temperature to 80-90degC. Current desktop computers use a heat sink of approximately 60 times 80 mm<sup>2</sup> base area. Desktop computers are typically cooled by heat sinks mounted on the CPU. There is also a fan installed to a heat sink forming an assembly that is attached to the CPU. Air is forced through the heat sink by the fan. The fan-heat sink mechanism will be the key component to solve the heat problems. We deliver a novel copper bead heat sink (CBHS), which is a heat sink combines a sinter hollow copper ball to be its fin, to increase the heat exchange surface area with cooling air. By the other way, we made a coaxial rotor on a fan to enhance the heat transfer coefficient of convection. The goal of this plan is to make a new fabrication process, and the new type heat sink can dissipate the heat effectively. Preliminary result showed that the minimum value for the total thermal resistance is 0.48degC/W under 65 W input power. The heater surface temperature is around 51degC. The results of the bead fan are almost the same by clockwise and counterclockwise. The holes on the bottom cannot bring better performance. The wind can't go through those holes into the sink center. Research work is continuing for the heat transfer enhance of CBHS.
    關聯: Semiconductor Thermal Measurement and Management Symposium, 2009. SEMI-THERM 2009. 25th Annual IEEE, pp.228-231
    DOI: 10.1109/STHERM.2009.4810768
    顯示於類別:[電機工程學系暨研究所] 會議論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    A Novel Copper Bead Heat Sink for Computer Cooling.pdf全文檔939KbAdobe PDF405檢視/開啟
    index.html0KbHTML340檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋