淡江大學機構典藏:Item 987654321/75117
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62830/95882 (66%)
造访人次 : 4038617      在线人数 : 576
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/75117


    题名: Synthesis and characterization of UV- and thermo-curable difunctional epoxyacrylates
    作者: Su, Yu-Chieh;Cheng, Liao-Ping;Cheng, Kuo-Chung;Don, Trong-Ming
    贡献者: 淡江大學化學工程與材料工程學系
    关键词: Chemical synthesis;Fourier transform infrared spectroscopy (FTIR);Adhesion;Epoxyacrylate
    日期: 2012-02
    上传时间: 2012-03-13 09:27:39 (UTC+8)
    出版者: Lausanne: Elsevier S.A.
    摘要: This paper describes the synthesis and characterization of difunctional epoxyacrylate oligomers from the reaction of diglycidyl ether of bisphenol-A (DGEBA) and acrylic acid (AA) in the presence of triphenyl phosphine as catalyst. The reaction was investigated in situ by using Fourier transform-infrared spectroscopy in the temperature range of 60–120°C, and demonstrated to be an addition esterification between the epoxide group and the carboxyl group. The specific rate constants calculated from the second-order kinetics obeyed Arrhenius law very well, and from which the activation energy was found to be 63.9 kJ mol−1. Moreover, various batches of respective epoxyacrylates, EA25 to EA100, were prepared by changing the equivalent ratio of carboxyl/epoxide from 0.25 to 1.0 in the feed under a temperature profile of 100°C for 2 h and another 2 h at 120°C. The epoxide conversions, acid values and epoxide equivalent weights of the produced EA25 to EA100 were all measured. The analysis by gel permeation chromatography revealed that the EA25 to EA75 consisted of unreacted DGEBA, monoacrylate-terminated epoxyacrylate and bisacrylate-terminated epoxyacrylate; while the EA100 was composed of only latter two. Increasing the initial carboxyl/epoxide equivalent ratio increased the epoxide conversion and the amount of bisacrylate-terminated epoxyacrylate. Yet, with an initial carboxyl/epoxide equivalent ratio of 0.5, the EA50 produced the maximum proportion (∼72%) of monoacrylate-terminated epoxyacrylate, which had one terminal double bond for UV-cure and one epoxide end group for thermo-cure. This dual-curable epoxyacrylate thus can be used as an adhesive sealant for LCD production.
    關聯: Materials Chemistry and Physics 132(2–3), pp.540–549
    DOI: 10.1016/j.matchemphys.2011.11.067
    显示于类别:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    epoxyacrylate-MAC15364.pdf868KbAdobe PDF335检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈