CFD analysis of the initial stages of particle deposition in spiral-wound membrane modules

doi:10.1016/j.desal.2011.10.001

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/75004

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/75004

題名:	CFD analysis of the initial stages of particle deposition in spiral-wound membrane modules
作者:	Li, Yu-ling;Tung, Kuo-lun;Chen, Yu-shao;Hwang, Kuo-jen
貢獻者:	淡江大學化學工程與材料工程學系
關鍵詞:	Membrane module;Curvature;CFD;Spacer;Particle deposition
日期:	2012-02-15
上傳時間:	2012-03-02 10:45:10 (UTC+8)
出版者:	Amsterdam: Elsevier BV
摘要:	Particle deposition in a spiral-wound membrane module was simulated using computational fluid dynamics (CFD). A scheme similar to the Eulerian–Lagrangian numerical method was adopted for the two-phase flow simulation. The effect of curvature on particle transport in four spacer-filled channel configurations with permeable membrane surfaces was analyzed by considering the fluid drag, body force and lift force exerted on the particles. The numerical results showed that there are inherent changes in the particle deposition profile in the spacer-filled channel due to variations in curvature. Comparing the particle deposition profiles and deposition ratios for submerged, zigzag, i-cavity and o-cavity spacer-filled channels showed that, for a given feed velocity and permeation rate, the zigzag-type spacer is best at decreasing the influence of curvature and preventing particle fouling on the membrane. A microscopic understanding derived from the CFD analysis could improve module design and enhance membrane module performance.
關聯:	Desalination 287, pp.200–208
DOI:	10.1016/j.desal.2011.10.001
顯示於類別:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
0011-9164_287_p200-208.pdf		2083Kb	Adobe PDF	403	檢視/開啟
1-s2.0-S0011916411008502-main.pdf		2083Kb	Adobe PDF	1	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....