淡江大學機構典藏:Item 987654321/75002
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62822/95882 (66%)
造訪人次 : 4022016      線上人數 : 1064
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/75002


    題名: Effects of Membrane Morphology and Operating Conditions on Microfiltration Particle Fouling
    作者: Hwang, Kuo-jen;Liao, Chien-yao
    貢獻者: 淡江大學化學工程與材料工程學系
    關鍵詞: Particle fouling;Microfiltration;Membrane blocking;Blocking models;Membrane morphology
    日期: 2012-01
    上傳時間: 2012-03-02 10:35:05 (UTC+8)
    出版者: Amsterdam: Elsevier BV
    摘要: The effects of membrane morphology and operating conditions on the particle fouling in dead-end microfiltration are studied to verify the criteria for membrane selection. Three kinds of membranes, Isopore, Durapore and MF-Millipore membranes, with similar mean pore sizes around 0.45 μm are used for filtering 0.15 μm PMMA particles. The blocking index and resistance coefficient used for membrane blocking models are analyzed during microfiltration. The membrane pore blocking is dominant and the blocking index decreases gradually in the early filtration period. The blocking index drops suddenly to zero when a critical condition reaches; and the filtration follows up the cake filtration model thereafter. A membrane blocking chart is established for relating the blocking index and operating conditions for the used membranes. Comparing the results under a fixed filtration pressures, the blocking occurred in Isopore membrane is the most serious. The use of MF-Millipore membrane causes a filter cake to more easily form on the membrane surface. While the use of Durapore membrane results in the highest filtration flux due to its antifouling behavior. To analyze the critical filtration flux and particle accumulation at the changing point of blocking models, the sequence of difficulty in transforming to cake filtration is Isopore > Durapore > MF-Millipore membrane. The force analysis on depositing particles shows that a power relationship exists between the overall filtration resistance and filtration pressure at the critical condition. The critical overall filtration resistance has a sequence of Isopore > Durapore > MF-Millipore membrane under a fixed filtration pressure.
    關聯: Journal of the Taiwan Institute of Chemical Engineers 43(1), pp.46-52
    DOI: 10.1016/j.jtice.2011.07.001
    顯示於類別:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    0368-1653_43(1)_p46-52.pdf839KbAdobe PDF302檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋