淡江大學機構典藏:Item 987654321/74664
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3945147      線上人數 : 607
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/74664


    題名: 直接甲醇燃料電池微幫浦與輕量化集電片之設計與製作
    其他題名: Design and fabrication of micro pumps and light weight current collectors applied on the direct methanol fuel cell
    作者: 宋旻峰;Sung, Min-Feng
    貢獻者: 淡江大學機械與機電工程學系博士班
    李世鳴;Lee, Shi-Min
    關鍵詞: 直接甲醇燃料電池;微機電;微幫浦;FR4玻璃纖維;輕量化;Direct Methanol Fuel Cell;Micro Electro Mechanical Systems;Micro Pump;FR4 Glass/Epoxy;Lightweight
    日期: 2011
    上傳時間: 2011-12-28 19:14:10 (UTC+8)
    摘要: 直接甲醇燃料電池(Direct Methanol Fuel Cell, DMFC)使用甲醇溶液為液態燃料，為了維持DMFC穩定性與效能，常使用主動式液態幫浦將燃料輸送至DMFC中。然而幫浦所消耗的功率將影響DMFC系統的總輸出效率，因此本研究擬設計與製作出適合應用至DMFC之磁力式與隔薄膜氣液式兩款微幫浦，其中磁力式微幫浦的低操作電壓與電流，在應用至微型燃料電池充電系統，可以有效地降低系統對幫浦消耗功率的需求，進而提升整體系統的效率。隔薄膜氣液式微幫浦則可以同時帶動陽極的液體燃料與陰極的氣體，若將其應用在小型DMFC系統時，有助於系統的微型化。
    此外，DMFC所使用之集電片或雙極板的材質與重量，影響了DMFC系統的體積與微型化，因此本論文擬應用微機電製程(Micro Electro Mechanical Systems, MEMS)中常見的熱蒸鍍技術(Thermo coater technique)，將FR4玻璃纖維基材表面鍍上金屬薄層，以製作出圓盤狀輕量化集電板。研究中所開發出的圓盤狀輕量化集電板具有低成本、輕量化、與設計多樣性等優點，相當適合應用至微型燃料電池。最後本論文將結合所開發出的微幫浦、圓盤狀輕量化集電板與直流升壓電路，完成一款可攜式DMFC充電系統。
    Direct methanol fuel cells (DMFC) adopt a methanol solution as the liquid fuel. To maintain the stability and performance of DMFCs, an active liquid pump is typically used to supply fuel to the DMFCs. However, the power consumption of the pump affects the total efficiency of a DMFC system. Therefore, this research aims to design and fabricate both a magnetic micro pump and a diaphragm liquid/air micro pump suitable for direct use with methanol fuel cells. When applied to small DMFC charger systems, the low operation voltage and low current characteristics efficiently reduce the power consumption of the system and increase the efficiency of the entire system.
    The diaphragm liquid/air micro pump can drive anode liquid fuel and cathode air simultaneously. If applied to small DMFC systems, it can facilitate system miniaturization.
    Additionally, the material and weight of the current collector on the bipolar plates adopted in DMFCs will affect the volume and miniaturization of DMFCs. Therefore, this thesis applies the thermal coating technique, which is widely used in microelectromechanical systems (MEMS), to construct the circular lightweight current collectors by coating thin films on FR4 glass/epoxy substrate surfaces.
    The current collector developed in this research has the advantages of being low cost and lightweight with a flexible design, making it suitable for micro fuel cell applications. Finally, this thesis integrates the developed micro pumps, the circular light weight current collectors, and the boost circuit to construct a DMFC charge system.
    顯示於類別:[機械與機電工程學系暨研究所] 學位論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML223檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋