Improvement in Performance of Cool Discharge Systems from Ice Melting with Producing Chilled Air under Constant Heat Flux and External Refluxes

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/71754

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/71754

题名:	Improvement in Performance of Cool Discharge Systems from Ice Melting with Producing Chilled Air under Constant Heat Flux and External Refluxes
作者:	葉和明
贡献者:	淡江大學化學工程與材料工程學系
日期:	2004-02-01
上传时间:	2011-10-24 01:38:38 (UTC+8)
摘要:	The effects of recycle at the ends on the heat transfer through two parallel plates with one side heated and the other side insulated in cool-thermal discharge systems by melting ice have been studied to produce chilled air under constant heat flux at the free liquid surface. The mathematical formulation was derived from an analysis of the heat transfer coupled with a moving boundary to estimate the required air mass flow rate by direct contact of air with melting ice. The numerical results show that the recycle can enhance the heat transfer rate, and thus lower outlet chilled air temperature during on-peak daytime hours, represented graphically and compared with that in an open duct of the same working dimensions without recycle. Three examples of inlet air temperatures with specified discharge fluxes are discussed. The effect of recycle on the enhancement of heat transfer efficiency is also delineated.
關聯:	Numerical Heat Transfer 45(5), p.505-516
DOI:	10.1080/10407780490269283
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

没有与此文件相关的档案.

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章