Improvement in Performance of Cool Discharge Systems from Ice Melting with Producing Chilled Air under Constant Heat Flux and External Refluxes

機構典藏 > College of Engineering > Graduate Institute & Department of Chemical and Materials Engineering > Journal Article > Item 987654321/71754

Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/71754

Title:	Improvement in Performance of Cool Discharge Systems from Ice Melting with Producing Chilled Air under Constant Heat Flux and External Refluxes
Authors:	葉和明
Contributors:	淡江大學化學工程與材料工程學系
Date:	2004-02-01
Issue Date:	2011-10-24 01:38:38 (UTC+8)
Abstract:	The effects of recycle at the ends on the heat transfer through two parallel plates with one side heated and the other side insulated in cool-thermal discharge systems by melting ice have been studied to produce chilled air under constant heat flux at the free liquid surface. The mathematical formulation was derived from an analysis of the heat transfer coupled with a moving boundary to estimate the required air mass flow rate by direct contact of air with melting ice. The numerical results show that the recycle can enhance the heat transfer rate, and thus lower outlet chilled air temperature during on-peak daytime hours, represented graphically and compared with that in an open duct of the same working dimensions without recycle. Three examples of inlet air temperatures with specified discharge fluxes are discussed. The effect of recycle on the enhancement of heat transfer efficiency is also delineated.
Relation:	Numerical Heat Transfer 45(5), p.505-516
DOI:	10.1080/10407780490269283
Appears in Collections:	[Graduate Institute & Department of Chemical and Materials Engineering] Journal Article

Files in This Item:

File	Size	Format
index.html	0Kb	HTML	31	View/Open