The Analysis of Forming Limit in Re-penetration Process of the Hole-Flanging of Sheet Metal

doi:10.1016/j.jmatprotec.2007.11.212

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 會議論文 > Item 987654321/70681

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/70681

题名:	The Analysis of Forming Limit in Re-penetration Process of the Hole-Flanging of Sheet Metal
作者:	Li, Ching-Lun;Huang, You-Min;Tsai, Yi-Wei
贡献者:	淡江大學機械與機電工程學系
关键词:	penetration;re-penetration;hole-flanging;forming limit ratio
日期:	2007-10
上传时间:	2011-10-23 21:40:25 (UTC+8)
出版者:	Daejeon: The Korea Advanced Institute of Science and Technology
摘要:	limit. Two sets of tools with different dimensions were designed for experiments to verify the reliability of the program. By using the designed tools for re-penetration process, this paper studied the effect of the direct penetration and re-penetration on the workpiece. Besides, this paper also discussed the comparison of experiments and numerical analysis between penetration and re-penetration processes. According to the comparison between simulation and experiment, the punch load of re-penetration was less than the punch load of direct penetration. The maximum punch load increased remarkably upon decreasing the profile radius of cylindrical punch and the initial diameter of the inner hole of blank. Moreover, the re-penetration had better formability than the direct penetration in the same condition. The forming limit ratio of the re-penetration process was improved from 2.70 to 2.97. The simulation results showed good agreement with the experiments.
關聯:	Proceedings of 10th International Conference on Advances in Materials and Processing Technologies (AMPT2007), 5p.
DOI:	10.1016/j.jmatprotec.2007.11.212
显示于类别:	[機械與機電工程學系暨研究所] 會議論文

文件中的档案:

档案	大小	格式	浏览次数
index.html	0Kb	HTML	288	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....