淡江大學機構典藏:Item 987654321/69901
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3884682      線上人數 : 251
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/69901


    題名: CFD 於高層建築耐風設計風力之應用
    其他題名: CFD Applications on the Wind Resistant Design of Tall Buildings
    作者: 傅仲麟;李世鳴;鄭啟明
    貢獻者: 淡江大學土木工程學系
    關鍵詞: 計算流體力學;V2F紊流模式;高層建築;設計風力;CFD;V2F model;Wind tunnel validation;Tall building;Design wind load
    日期: 2006-09
    上傳時間: 2011-10-23 20:34:11 (UTC+8)
    出版者: 臺北市：中華民國結構工程學會
    摘要: 本研究探討計算流體力學(CFD)對於高層建築初步設計風力評估之適用性。本研究以高雄八五大樓為例，分別以風洞實驗及計算流體力學模擬，計算其順風向風力及風壓分佈，並與規範計算結果進行比較，評估該大樓之設計風力。在計算流體力學模擬部分，採用商用計算軟體STAR-CD進行模擬，紊流模式則使用近年發展之V2F紊流模式進行計算。文中針對一測試題目驗證該紊流模式之準確性。風洞實驗採用1/350縮尺壓克力模型進行模擬，利用多頻道風壓感應器量測其表面風壓進而計算其整體風力。根據計算比較結果顯示，CFD計算值稍低於風洞試驗值。而與規範設計值比較上，CFD計算較能掌握非矩形或非均勻斷面建築在不同高度之風力變化特性。故在進行高層建築初步設計時，CFD計算結果應可提供建築師在建築外型初始設計階段，對於風力效應之參考。
    This paper investigates the appropriateness of the CFD simulation on the design wind loads of a tall building in the preliminary design stage. An isolated 85-story building was selected for this purpose. CFD study was carried out to evaluate structural design wind loads. During the numerical simulation, the V2F turbulence model and commercial CFD software, STAR-CD, was used for the numerical simulation. In order to validate the CFD results, wind tunnel test was performed. This investigation indicates that the CFD technique can be used to predict the mean wind load of an isolated tall building with reasonable accuracy, therefore, suitable for the purpose of preliminary building design.
    This paper investigates the appropriateness of the CFD simulation on the design wind loads of a tall building in the preliminary design stage. An isolated 85-story building was selected for this purpose. CFD study was carried out to evaluate structural design wind loads. During the numerical simulation, the V2F turbulence model and commercial CFD software, STAR-CD, was used for the numerical simulation. In order to validate the CFD results, wind tunnel test was performed. This investigation indicates that the CFD technique can be used to predict the mean wind load of an isolated tall building with reasonable accuracy, therefore, suitable for the purpose of preliminary building design.
    關聯: 中華民國第八屆結構工程研討會論文集=Proceedings of the 8th National Conference on Structural Engineering，7頁
    顯示於類別:[土木工程學系暨研究所] 會議論文

    文件中的檔案:

    沒有與此文件相關的檔案.

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋