淡江大學機構典藏:Item 987654321/69226
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3988394      線上人數 : 631
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/69226


    題名: Optimization Design of the Hot Embossing Process for Plastic Microstructures Fabrication
    作者: Hsiung, Shu-Feng;Lee, Hsiu-Mei;Tsai, Tzong-Ru
    貢獻者: 淡江大學統計學系
    關鍵詞: Factorial design;Failure rate;Signal-to-noise ratio;Standard operating procedure;Treatment
    日期: 2010-12
    上傳時間: 2011-10-23 16:39:46 (UTC+8)
    出版者: ICIC International
    摘要: This study explores the increase in quality improvement of a hot-embossing process, which was developed by a local electronic company in Taiwan, based on the fractional factorial design method. A standard operating procedure is suggested to the engineers to follow as to methodologically improve the quality of the manufacturing process.
    關聯: ICIC Express Letters, Part B: Applications 1(2), pp.183-188
    顯示於類別:[統計學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    2185-2766_1(2)p183-188.pdf1061KbAdobe PDF1檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋