淡江大學機構典藏:Item 987654321/65396
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62805/95882 (66%)
造訪人次 : 3945315      線上人數 : 598
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65396


    題名: The Application of V-Groove Solt-Array Method to the Piezoresistive Pressure Sensors
    其他題名: 應用V型槽深度尺於壓阻式壓力計之製作
    作者: 楊龍杰;Yang, Lung-jieh;江振家;Jian, C. C.;張培仁;Chang, P. Z.
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: piezoresistive;pressure sensor;V-groove
    日期: 1997-03
    上傳時間: 2013-07-11 11:53:32 (UTC+8)
    出版者: Taipei : Chinese Institute of Chemical Engineers
    摘要: This paper describes a simple method to identify the membrane thickness of the piezoresistive pressure sensor by the so-called “slotarray” which has been made in advance on the wafers before sensor fabrication. Such a method can be applied as a substitute for other etch-stop techniques with micrometer-resolution. The results can also be used to check the uniformity of pressure sensors and give a guideline for further improvements in the batch process of silicon bulk micromachining. A series of pressure sensors with a chip size of 3×3×0.2mm3 were presented as the examples of the V-groove slot-array method. The finite element method (FEM) software ANSYS was accessed to predict the stress and resistance change of the sensors. The new pressure sensors with stiffened-bosses are tested and had a best sensitivity of 9.0 mV/atm/V and a non-linearity less than 1%.
    關聯: Journal of the Chinese Institute of Engineers=中國工程學刊 20(3), pp.335-347
    DOI: 10.1080/02533839.1997.9741837
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML301檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋