淡江大學機構典藏:Item 987654321/65394
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64191/96979 (66%)
造訪人次 : 8153070      線上人數 : 7734
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65394


    題名: The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal
    作者: Li, Ching-Lun;Huang, You-Min;Tsai, Yi-Wei
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: penetration;re-penetration;hole-flanging;forming limit ratio
    日期: 2008-05
    上傳時間: 2011-10-20 21:46:17 (UTC+8)
    出版者: Lausanne: Elsevier S.A.
    摘要: A methodology for formulating an elasto-plastic finite element model was developed to analyze the direct penetration and re-penetration in the hole-flanging process. The model was based on the updated lagrangian formulation, Prandtl-Reuss flow rule, and Hill's yield criterion. Simulation results included the relationship between punch load and punch stroke, the variation of the workpiece thickness, and the forming limit. Two sets of tools with different dimensions were designed for experiments to verify the reliability of the program. By using the designed tools for re-penetration process, this paper studied the effect of the direct penetration and re-penetration on the workpiece. Besides, this paper also discussed the comparison of experiments and numerical analysis between penetration and re-penetration processes. According to the comparison between simulation and experiment, the punch load of re-penetration was less than the punch load of direct penetration. The maximum punch load increased remarkably upon decreasing the profile radius of cylindrical punch and the initial diameter of the inner hole of blank. Moreover, the re-penetration had better formability than the direct penetration in the same condition. The forming limit ratio of the re-penetration process was improved from 2.70 to 2.97. The simulation results showed good agreement with the experiments.
    關聯: Journal of Materials Processing Technology201(1-3), pp.256-260
    DOI: 10.1016/j.jmatprotec.2007.11.212
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML70檢視/開啟
    The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal.pdf690KbAdobe PDF1檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋