淡江大學機構典藏:Item 987654321/65394
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8065291      在线人数 : 10695
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65394


    题名: The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal
    作者: Li, Ching-Lun;Huang, You-Min;Tsai, Yi-Wei
    贡献者: 淡江大學機械與機電工程學系
    关键词: penetration;re-penetration;hole-flanging;forming limit ratio
    日期: 2008-05
    上传时间: 2011-10-20 21:46:17 (UTC+8)
    出版者: Lausanne: Elsevier S.A.
    摘要: A methodology for formulating an elasto-plastic finite element model was developed to analyze the direct penetration and re-penetration in the hole-flanging process. The model was based on the updated lagrangian formulation, Prandtl-Reuss flow rule, and Hill's yield criterion. Simulation results included the relationship between punch load and punch stroke, the variation of the workpiece thickness, and the forming limit. Two sets of tools with different dimensions were designed for experiments to verify the reliability of the program. By using the designed tools for re-penetration process, this paper studied the effect of the direct penetration and re-penetration on the workpiece. Besides, this paper also discussed the comparison of experiments and numerical analysis between penetration and re-penetration processes. According to the comparison between simulation and experiment, the punch load of re-penetration was less than the punch load of direct penetration. The maximum punch load increased remarkably upon decreasing the profile radius of cylindrical punch and the initial diameter of the inner hole of blank. Moreover, the re-penetration had better formability than the direct penetration in the same condition. The forming limit ratio of the re-penetration process was improved from 2.70 to 2.97. The simulation results showed good agreement with the experiments.
    關聯: Journal of Materials Processing Technology201(1-3), pp.256-260
    DOI: 10.1016/j.jmatprotec.2007.11.212
    显示于类别:[機械與機電工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 描述 大小格式浏览次数
    index.html0KbHTML70检视/开启
    The analysis of forming limit in re-penetration process of the hole-flanging of sheet metal.pdf690KbAdobe PDF1检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈