淡江大學機構典藏:Item 987654321/65390
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 64185/96959 (66%)
造訪人次 : 11669083      線上人數 : 21156
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65390


    題名: Study on the Surface Integrity of Micro-Ultrasonic Machined Glass-ceramic Material
    作者: Fan, Wei-haw;Chao, Choung-lii;Chou, Wen-chen;Chen, Ta-tung;Chao, Chung-woei
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: Brittle Materials;Subsurface Damage;Ultrasonic Machining
    日期: 2009-02
    上傳時間: 2011-10-20 21:45:59 (UTC+8)
    出版者: Stafa-Zurich: Trans Tech Publications Ltd.
    摘要: Ultrasonic machining (USM) technique has long been used for fabricating various patterns and drilling holes on brittle materials. However, the surfaces generated by USM are normally rather rough and covered by deep penetrated cracks. This has greatly limited USM being used in micro-machining and fine machining. This research aimed to study the surface integrity of the USMed surface and develop a feasible way to minimize the scattered cracks so that good surface finish could be achieved. Machining parameters such as type and concentration of abrasive particles, grit size, and feed rate were systematically investigated to check their influences on the surface obtained. A ‘multi-stage’ micro-USM process was developed in this study and surface with Ra value better than 0.2m was achieved using the proposed process.
    關聯: Key Engineering Materials 407-408, pp.731-734
    DOI: 10.4028/www.scientific.net/KEM.407-408.731
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    1662-9795_407-408p731-734.pdf413KbAdobe PDF159检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈