淡江大學機構典藏:Item 987654321/65317
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 62797/95867 (66%)
Visitors : 3745133      Online Users : 492
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version
    Please use this identifier to cite or link to this item: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65317


    Title: High Temperature Interfacial Reaction between Glass Gobs and Sol-Gel Coated Al2O3 Films
    Authors: Chien, Hsi-hsin;Ma, Kung-jeng;SV Prabhakar Vattikuti;Kuo, Chien Hung;Huo, Zen Bong;Chao, Choung-lii
    Contributors: 淡江大學機械與機電工程學系
    Keywords: Glass Molding;Interfacial Reaction;Sol-Gel Al2O3 Coating
    Date: 2009-09
    Issue Date: 2013-05-30 15:25:28 (UTC+8)
    Publisher: Stafa-Zurich: Trans tech publications
    Abstract: Glass molding process is considered to have a great potential for the mass production of optical components with lower cost. Up to now, the service life of molding dies is still not satisfied. This study mainly focuses on the development of sol-gel derived Al2O3 coatings in order to extend the service life of glass molding dies. High temperature glass wetting experiment was carried out to investigate the high temperature interfacial reaction between the coatings and glass gobs. The 304 stainless steel were used as the substrate materials. The sol-gel coated Al2O3 was selected as the protective coating. OHARA L-BAL42 glass gobs were chosen as the test materials. It can be observed that very severe interfacial reaction occurs between stainless steel and glass at high temperature. The contact angle dramatically decreases from initial and then gradually approaches 25° at 825℃ after 2 minutes holding time. The severe interface chemical reaction also results in the loss of transparency in glass appearance. The reaction products such as Zn and Ba are mainly from glass material. For the case of Al2O3 coated substrate, the variation of the contact angles varied from 152 to 138°, presents anti-sticking or non wetting behavior. There are no reaction products can be found on the glass contacted area after wetting test.
    Relation: Advanced Materials Research76-78, pp.708-712
    DOI: 10.4028/www.scientific.net/AMR.76-78.708
    Appears in Collections:[Graduate Institute & Department of Mechanical and Electro-Mechanical Engineering] Journal Article

    Files in This Item:

    File SizeFormat
    index.html0KbHTML16View/Open

    All items in 機構典藏 are protected by copyright, with all rights reserved.


    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - Feedback