Friction welding of similar materials: PP, HDPE and Nylon 6

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/65314

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65314

题名:	Friction welding of similar materials: PP, HDPE and Nylon 6
作者:	林清彬
贡献者:	淡江大學機械與機電工程學系
关键词:	friction welding;polypropylene (PP);high-den-sity polyethylene (HDPE);nylon-6;bonding strength
日期:	2003-01-01
上传时间:	2011-10-20 21:39:23 (UTC+8)
摘要:	The effects of spin-friction pressure and timing on the friction welding between parts of the same materials, PP, HDPE, and nylon-6, are discussed. The heat-affected zone is divided into three regions: the plasticized region (Zpl), the partly plasticized region (Zpd), and the undeformed region (Zud). The tensile fracture morphology has three main sections: the nonplasticized central section (Fud), the plasticized peripheral section (Fpl), and the partly plasticized section between Fud and Fpl (Fpd). Friction pressures (spinning timing) of 1.17 MPa (16 s) in PP–PP welding, 1.77 MPa (8 s) in HDPE–HDPE welding, and 0.98 MPa (8, 10, and 12 s) in nylon-6–nylon-6 welding attains better bonding strength because their components have larger Fpd and Fpl regions, which have no Fud in the central part.
關聯:	Journal of Biomaterials Science. Polymer Edition 91(5), pp.2771–2780
DOI:	10.1002/app.13459
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	39	检视/开启
index.html		0Kb	HTML	136	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章