Fabrication of Wireless Micro Pressure Sensor Using the CMOS Process

doi:10.3390/s91108748

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/65307

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65307

题名:	Fabrication of Wireless Micro Pressure Sensor Using the CMOS Process
作者:	Dai, Ching-Liang;Lu, Po-Wei;Wu, Chyan-Chyi;Chang, Chienliu
贡献者:	淡江大學機械與機電工程學系
关键词:	wireless micro pressure sensor;CMOS-MEMS;oscillators
日期:	2009-04
上传时间:	2011-10-20 21:38:53 (UTC+8)
出版者:	Basel: MDPI AG
摘要:	In this study, we fabricated a wireless micro FET (field effect transistor) pressure sensor based on the commercial CMOS (complementary metal oxide semiconductor) process and a post-process. The wireless micro pressure sensor is composed of a FET pressure sensor, an oscillator, an amplifier and an antenna. The oscillator is adopted to generate an ac signal, and the amplifier is used to amplify the sensing signal of the pressure sensor. The antenna is utilized to transmit the output voltage of the pressure sensor to a receiver. The pressure sensor is constructed by 16 sensing cells in parallel. Each sensing cell contains an MOS (metal oxide semiconductor) and a suspended membrane, which the gate of the MOS is the suspended membrane. The postprocess employs etchants to etch the sacrificial layers in the pressure sensor for releasing the suspended membranes, and a LPCVD (low pressure chemical vapor deposition) parylene is adopted to seal the etch holes in the pressure. Experimental results show that the pressure sensor has a sensitivity of 0.08 mV/kPa in the pressure range of 0–500 kPa and a wireless transmission distance of 10 cm.
關聯:	Sensors 9(11), pp.8748-8760
DOI:	10.3390/s91108748
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	235	检视/开启
sensors-09-08748.pdf		972Kb	Adobe PDF	1	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....