Development of a Non-contact Measurement System for In-situ Tool Profile Monitoring

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/65293

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65293

题名:	Development of a Non-contact Measurement System for In-situ Tool Profile Monitoring
作者:	Chao, C.L.;Cheng, T.A.;Lou, D.C.;Chao, C.W.
贡献者:	淡江大學機械與機電工程學系
日期:	2006-11
上传时间:	2011-10-20 21:37:45 (UTC+8)
摘要:	Single crystal diamond tool has the highest known hardness, good wear resistance, high conductivity, low in thermal expansion which makes it an ideal tool material for cutting precision diffractive optical elements, aspheric metal optical components etc. As long as tools are in use, it is only the matter of time tool will experience attritious wear, micro-fracture and eventually worn out. Since the surface roughness and form accuracy are very much depending on the sharpness and shape accuracy of the tool. Whatever is happened on the cutting edge will reflect on the workpiece. An effective and precise tool profile monitoring technique is of essential importance in ultra-precision diamond turning operation. The optical/non-contact way of tool profile monitoring has the advantage of not having to touch the tool, but its resolution is limited by the optical diffraction limit and the resolution of the CCD device used (mm/pixel). A non-contact precision tool profile monitoring system is developed and built in this study. The results showed good agreement with the profile data obtained by SEM micrographs and data measured by the precision profilometer.
關聯:	J. of C.C.I.T 35(1)
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

没有与此文件相关的档案.

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....