Design and fabrication of RF MEMS switch by CMOS process

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/65291

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65291

题名:	Design and fabrication of RF MEMS switch by CMOS process
作者:	Wu, C.C.
贡献者:	淡江大學機械與機電工程學系
关键词:	CMOS;Post-process;MEMS;RF Switch
日期:	2005-04-01
上传时间:	2011-10-20 21:37:37 (UTC+8)
摘要:	This work investigates the fabrication of a RF (ratio frequency) MEMS (micro elector mechanical system) switch using the standard 0.35 μm 2P4M (double polysilicon four metal) CMOS (complementary metal oxide semiconductor) process and the post-process. The switch is a capacitive type, which is actuated by an electrostatic force. The structure of the switch consists of a CPW (coplanar waveguides) transmission lines and a suspended membrane. The CPW lines and the membrane are the metal layers of the CMOS process. The main advantage of the RF switch is only needed a simple post-process, which is compatible with the CMOS process. The post-process uses an etchant, silox vapox Ⅲ, to etch oxide layer to release the suspended membrane and springs. Experiment results show that the pull-in voltage of the switch is about 17 V. The insertion loss and return loss in the range of 10 to 40 GHz are -2.5 dB and -13 dB, respectively.
關聯:	Tamkang Journal of Science and Engineering8(3), pp.197-202
DOI:	10.6180/jase.2005.8.3.03
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
Design and fabrication of RF MEMS switch by CMOS process.pdf		171Kb	Adobe PDF	24	检视/开启
index.html		0Kb	HTML	19	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章