A flapping MAV with PVDF-parylene composite skin

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/65259

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/65259

题名:	A flapping MAV with PVDF-parylene composite skin
作者:	楊龍杰;Yang, L. J.;Hsu C.-K.;Feng, C.-K.;Ho, J.-Y.;Feng, G.-H.;Shih H.-M.
贡献者:	淡江大學機械與機電工程學系
日期:	2007-09
上传时间:	2011-10-20 21:35:01 (UTC+8)
摘要:	The research of micro aerial vehicles (MAVs) is a new field of low-Reynolds-number flow, which attracts much attention in the advanced aeronautical area. The flapping wing, proved by many natural flyers, is the most appropriate way of flying objects which sizes are less than 6 inches. However, there is still plenty of room for people to investigate the unsteady aerodynamic characteristic of flapping wings. In this paper, the flapping wing of lightweight and high strength is composed of the titanium-alloy frame and the parylene skin. Such an integration of fabrication needs the help of MEMS processing technique. In the wind-tunnel test of the flapping MAV, the signals from load cell and PVDF film are used to detect the on-site lift. Both of the lift signals from PVDF and the load-cell are basically identical with the same flapping frequency and the similar qualitative behavior. Finally, we integrate Li-battery into the MAV to perform a successful free flight with a range of 10-15 meters.
關聯:	Journal of the Aeronautics and Astronautics-Series A 39(3), pp.195-201
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	261	检视/开启
SASN-A0019.pdf		364Kb	Adobe PDF	1	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章