Non-Uniformity of Wafer and Pad in CMP: Kinematic Aspects of View

淡江大學機構典藏 > 工學院 > 航空太空工程學系暨研究所 > 會議論文 > Item 987654321/62477

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/62477

题名:	Non-Uniformity of Wafer and Pad in CMP: Kinematic Aspects of View
作者:	Tyan, Feng
贡献者:	淡江大學航空太空工程學系
日期:	2005-06
上传时间:	2011-10-18 21:35:33 (UTC+8)
摘要:	In this paper, we analyze the non-uniformity of sliding distance on both wafer and polishing pad from kinematic point of view. Using the Fourier series expansion, we can show that in steady state the non-uniformity is determined by the ratio between rotary speeds of platen and wafer carrier (m), and the ratio of wafer radius to the distance between the center of platen and wafer (Rc/d). In general, the non-uniformity of wafer increases with \|m\| and Rc/d. An important observation for polishing pad is that in two particular ranges of the ratio m, the larger Rc/d produces the smaller non-uniformity. Then a ring type polishing pad is proposed for the purpose of improving the non-uniformity of both wafer and pad. However, it turns out that the result is much worse than we expected.
關聯:	American Control Conference, 2005. Proceedings of the 2005, v.3, pp.2046-2051
DOI:	10.1109/ACC.2005.1470271
显示于类别:	[航空太空工程學系暨研究所] 會議論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	316	检视/开启
Non-Uniformity of Wafer and Pad in CMP Kinematic Aspects of View.pdf		1337Kb	Adobe PDF	567	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章