Analysis of forming limits in metal forming processes

doi:10.1016/j.jmatprotec.2007.11.279

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/60605

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/60605

题名:	Analysis of forming limits in metal forming processes
作者:	Li, Ching-Lun;Huang, Y.-M.;Tsai, Y.-W.;Li, C.-L.
贡献者:	淡江大學機械與機電工程學系
关键词:	elliptical hole-flanging process;square cup drawing process;forming limit ratio
日期:	2008-05-26
上传时间:	2011-10-14 16:04:59 (UTC+8)
出版者:	Lausanne: Elsevier S.A.
摘要:	Forming limit plays a very important role in metal forming processes since it can be used to predict whether a blank will fracture or not. This paper examines the influence on forming limit of blank and fractured thickness. The fractured thickness of a specimen in the simple tension test is adopted as the fracture criterion of the forming limit, and is applied as fracture criterion in the FEM code. The model was based on the updated Lagrangian formulation, Prandtl-Reuss flow rule, and Hill's yield criterion. in the course of analysis, if blank thickness is equal to fractured thickness, it is considered that the forming limit of the blank has been reached. This paper has analyzed the square cup drawing process and the elliptical hole-flanging process, and calculated the forming limit ratio for each process. In addition, tools were designed to perform experiments for each process. Simulations and experiments were performed with varying processes and consistent results were obtained.
關聯:	Journal of Materials Processing Technology 201(1-3), pp.385-389
DOI:	10.1016/j.jmatprotec.2007.11.279
显示于类别:	[機械與機電工程學系暨研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
Analysis of forming limits in metal forming processes.pdf		789Kb	Adobe PDF	1	检视/开启
index.html		0Kb	HTML	27	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章

数据加载中.....