Light Flapping Micro Aerial Vehicle Using Electrical-Discharge Wire-Cutting Technique

doi:10.2514/1.38862

淡江大學機構典藏 > 工學院 > 機械與機電工程學系暨研究所 > 期刊論文 > Item 987654321/60547

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/60547

題名:	Light Flapping Micro Aerial Vehicle Using Electrical-Discharge Wire-Cutting Technique
作者:	Yang, Lung-Jieh;Hsu, Cheng-Kuei;Han, Hsieh-Cheng;Miao, Jr-Ming
貢獻者:	淡江大學機械與機電工程學系
日期:	2009-11
上傳時間:	2011-10-14 14:07:44 (UTC+8)
出版者:	Reston: American Institute of Aeronautics and Astronautics, Inc.
摘要:	Electrical-discharge wire cutting is a promising technique that provides flexibility and lightness for a flapping micro aerial vehicle. Electrical-discharge wire cutting is used to fabricate the high-aspect-ratio structure of the fourbar linkage gear transmission module made of aluminum-alloy 7075. Aluminum-alloy 7075 has excellent specific strength (yield strength/density) good for durability of the transmission module in a micro aerial vehicle’s tuff operation. A new flapping micro aerial vehicle of 21.6 cm wing span consequently has a minimum body mass of 5.9 g after installing the transmission module and a flexible wing frame made of carbon fibers and polyethylene terephthalate film. This micro aerial vehicle can endure a flight time of 6 min 7 s with the wingbeat frequency of 10–20 Hz. The lift and thrust coefficients of the micro aerial vehicle have been investigated through wind-tunnel testing. The proposed flapping micro aerial vehicle also exhibits the improved characteristic in the scaling law with respect to wingbeat frequency versus body mass.
關聯:	Journal of Aircraft 46(6), pp.1866-1874
DOI:	10.2514/1.38862
顯示於類別:	[機械與機電工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
35_2009_JA_0021_8669_S.pdf		1197Kb	Adobe PDF	1	檢視/開啟
index.html		0Kb	HTML	346	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....