淡江大學機構典藏:Item 987654321/60405
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4044525      線上人數 : 972
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/60405


    題名: Selective deposition of fine particles in constant-flux submerged membrane filtration
    作者: Hwang, Kuo-Jen;Chen, Hsieng-Chia
    貢獻者: 淡江大學化學工程與材料工程學系
    關鍵詞: Microfiltration;Submerged membrane filtration;Particle deposition;Cake properties;Particle size distribution
    日期: 2010-03
    上傳時間: 2011-10-13 22:38:44 (UTC+8)
    出版者: Amsterdam: Elsevier BV
    摘要: The selective deposition of fine particles in a constant-flux submerged microfiltration system is studied. The effects of operating conditions, such as filtration flux, injected air flow rate and air bubble size, on the particle deposition probability, cake mass and average specific cake filtration resistance are discussed. Smaller particles have more opportunity to deposit onto the membrane surface. The particle size distribution in the filter cake increases with increasing the filtration flux or bubble size, but with decreasing the injected air flow rate. The external forces exerted on the depositing particles are analyzed based on hydrodynamics and DLVO theory. The drag forces due to suspension flow, permeate flow, and bubble flow play the major role in determining the particle stability on the membrane surface. Interparticle forces are dominant for submicron particles, while gravitational force increases its weight as particle size exceeds 5 μm. A force balance model is used for estimating the particle deposition probability. An increase in filtration flux or a decrease in air flow rate leads to higher particle deposition probability, heavier cake, or lower average specific cake filtration resistance. The deposition probability is higher by injecting bigger bubbles under a specified air flow rate due to the lower bubble generation frequency. Consequently, a decrease in bubble size causes to lighter cake but higher average specific filtration resistance. The validities of the model predictions for particle deposition probability, cake mass and average specific filtration resistance are demonstrated by experimental data.
    關聯: Chemical Engineering Journal 157(2–3), pp.323–330
    DOI: 10.1016/j.cej.2009.11.008
    顯示於類別:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    index.html0KbHTML255檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋