Modeling extraction separation of Cu(II) in hollow-fiber modules

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/60387

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/60387

題名:	Modeling extraction separation of Cu(II) in hollow-fiber modules
作者:	Guo, Jia-Jan;Ho, Chii-Dong;Tu, Jr-Wei
貢獻者:	淡江大學化學工程與材料工程學系
關鍵詞:	Extraction;Mass transfer;Mathematical modeling;Membrane;Separations;Simulation
日期:	2009-08-01
上傳時間:	2011-10-13 22:35:28 (UTC+8)
出版者:	Kidlington: Pergamon
摘要:	The mass transfer problems in the hollow-fiber membrane extractor module with concurrent- and countercurrent-flow were investigated theoretically and experimentally in this study. A two-dimensional mathematical model of the hollow-fiber membrane extractor module was developed theoretically and the shell side flow described by Happel's free surface model was taken into account. The analytical solution is obtained using an eigenfunction expansion in terms of the power series and an orthogonal expansion technique. The theoretical predictions were represented graphically with the mass-transfer Graetz number (Gz), flow pattern and packing density (φ) as parameters and the theoretical results were also compared with those obtained by experimental runs. The highest extraction rate, extraction efficiency and mass transfer efficiency can be achieved by arranging the packing density φ=0.3. The results show that the device performance of the countercurrent-flow device is better than that of the concurrent-flow device. The experiments of the extraction of Cu2+ by using D2EHPA with PVDF hollow fibers is also set up to confirm the accuracy of the theoretical predictions. The accuracy of the theoretical predictions for concurrent- and countercurrent-flow are 5.87×10-2≤E1≤6.69×10-2 and 2.46×10-2≤E1≤3.48×10-2, respectively, for Gza=40.8.
關聯:	Chemical Engineering Science 64(15), pp.3455-3465
顯示於類別:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML	190	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....