Design procedure of an experimental membrane enhanced methane steam reformer

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/60351

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/60351

题名:	Design procedure of an experimental membrane enhanced methane steam reformer
作者:	Chen, Yih-Hang;Chi, Yan-Hsun;Chen, Kuan-Jung;Ward, Jeffrey D.
贡献者:	淡江大學化學工程與材料工程學系
关键词:	Fuel processor;Membrane enhanced steam reformer;Reactor design;Design procedure
日期:	2010-07-01
上传时间:	2011-10-13 22:29:18 (UTC+8)
出版者:	Amsterdam: Elsevier BV
摘要:	In this work, a systematic procedure to design a membrane enhanced steam reformer (MSR) is proposed. Mass and energy balance equations are used to model the membrane enhanced steam reformer. The dimensionless parameters that are used as design variables (i.e. Damkohler number (Da), permeation number (θ), and pre-reformer over membrane steam reformer length ratio (ϖ)) can be derived from material and energy balance equations. These design parameters were optimized to maximize the conversion of methane. The optimal point of the design variables was found to be (Da = 0.1, θ = 70, ϖ = 0.2); this was used to calculate the size of the MSR, the catalyst weight, and the methane flowrate. A MSR corresponding the optimal design was built and tested in the EEL of ITRI laboratory. The best methane and hydrogen production rate are 59% and 105 ml/min, respectively.
關聯:	Journal of the Taiwan Institute of Chemical Engineers=臺灣化學工程學會會誌 41(4), pp.492-499
DOI:	10.1016/j.jtice.2010.03.020
显示于类别:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的档案:

档案	大小	格式	浏览次数
index.html	0Kb	HTML	197	检视/开启

在機構典藏中所有的数据项都受到原著作权保护.

TAIR相关文章