Analysis of Particle Fouling in Constant Pressure Submerged Membrane Filtration

doi:10.1002/ceat.201000103

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/60348

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/60348

題名:	Analysis of Particle Fouling in Constant Pressure Submerged Membrane Filtration
作者:	Hwang, Kuo-Jen;Chen, Hsieng-Chia;Tsai, Ming-Hsiu
貢獻者:	淡江大學化學工程與材料工程學系
關鍵詞:	Cake properties;Microfiltration;Particle deposition;Particle size distribution;Submerged membrane filtration
日期:	2010-08
上傳時間:	2011-10-13 22:28:48 (UTC+8)
出版者:	Weinheim: Wiley - V C H Verlag GmbH & Co. KGaA
摘要:	Particle fouling in constant pressure submerged membrane filtration is analyzed. A particulate sample, with a wide size distribution ranging from submicron to micron, is filtered using a flat-sheet membrane module. The effects of filtration pressure and aeration conditions on the particle deposition probability, cake properties and filtration flux are discussed. Particle deposition is analyzed theoretically using a force balance model. The particle size distribution in a filter cake is smaller than that in the original suspension and gradually decreases during a filtration. An increase in filtration pressure leads to a higher filtration flux in the early period of filtration; however, after 3000 s the flux gradually approaches a pseudo-steady value. The filtration flux is significantly enhanced by sparging air bubbles. An increase in air volumetric flow rate or a decrease in bubble size leads to a smaller particle size distribution in the cake. The particle deposition probability, cake mass and average specific filtration resistance calculated by using the proposed models agree fairly well with available experimental data.
關聯:	Chemical Engineering & Technology 33(8), pp.1327–1333
DOI:	10.1002/ceat.201000103
顯示於類別:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML	338	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....