A 250 MHz 14 dB-NF 73 dB-Gain 82 dB-DR Analog Baseband Chain with Digital-Assisted DC-Offset Calibration for Ultra-Wideband

doi:10.1109/JSSC.2009.2036320

淡江大學機構典藏 > 工學院 > 電機工程學系暨研究所 > 期刊論文 > Item 987654321/55005

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/55005

題名:	A 250 MHz 14 dB-NF 73 dB-Gain 82 dB-DR Analog Baseband Chain with Digital-Assisted DC-Offset Calibration for Ultra-Wideband
作者:	施鴻源;Shih, Horng-yuan;Kuo, Chien-nan;Chen, Wei-hsien, Yang, Tzu-yi;Juang, Kai-chenug
貢獻者:	淡江大學電機工程學系
關鍵詞:	Analog filter;DC offset calibration;Analog baseband;Current-mode VGA;Current-mode filter;Ultra wideband
日期:	2010-02
上傳時間:	2011-08-09 11:05:04 (UTC+8)
出版者:	IEEE Solid-State Circuits Society
摘要:	A 250 MHz analog baseband chain for ultra-wideband was implemented in a 1.2 V 0.13 Â¿ m CMOS process. The chip has an active area of 0.8 mm2. In the analog baseband, PGAs and filters are carried out by current-mode amplifiers to achieve wide bandwidth and wide dynamic range of gain, as well as low noise and high linearity. Besides, a current-mode Sallen-Key low-pass filter is adopted for effective rejection of out-of-band interferers. A 6 th-order Chebyshev low-pass filter realized in Gm-C topology is designed in the baseband chain for channel selection. Digitally-assisted DC-offset calibration improves second-order distortion of the entire chain. The design achieves a maximum gain of 73 dB and a dynamic range of 82 dB. Measured noise figure is 14 dB, an IIP3 of -6 dBV, and IIP2 of -5 dBV at the maximum gain mode. The analog baseband chain consumes 56.4 mA under supply of 1.2 V.
關聯:	IEEE Journal of Solid-State Circuits 45(2), pp.338-350
DOI:	10.1109/JSSC.2009.2036320
顯示於類別:	[電機工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
05405150.pdf		1898Kb	Adobe PDF	541	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....