淡江大學機構典藏:Item 987654321/52769
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62797/95867 (66%)
造訪人次 : 3748544      線上人數 : 459
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/52769


    題名: Interpretation of Particle Fouling in Submerged Membrane Filtration by Blocking Models
    作者: 黃國楨;Hwang, Kuo-jen;陳豐富;Chen, Fung-fu
    貢獻者: 淡江大學化學工程與材料工程學系
    關鍵詞: Membrane Filtration;Particle Fouling;Microfiltration;Blocking Models;Filtration Resistance
    日期: 2009-03
    上傳時間: 2010-12-01 10:29:36 (UTC+8)
    出版者: 臺北縣:淡江大學
    摘要: The particle fouling in a submerged membrane filtration system is analyzed by use of membrane blocking models. Two kinds of ceramic membranes made of ZrO2-TiO2, K-04 and K-06, are used in experiments. Their mean pore sizes on the outer surfaces are 8 and 5 m, respectively. The values of blocking index under various filtration pressures are calculated and discussed. At the initial period of a filtration, the membrane internal blocking is dominant, and the blocking index decreases quickly. The index then suddenly drops to zero at a critical condition and keeps invariably thereafter. The boundary between membrane blocking and particle bridging conditions can be grasped by this blocking index analysis. Membrane blocking occurs only under higher filtration flux or less particle accumulation, while a filter cake may be formed to the contrary conditions. To compare the filtration performances of used membranes, membrane K-04 results in more severe membrane blocking at the initial period of filtration because of more large nominal pores. However, more particles can be continuously held up in the large pores of membrane K-06 due to a little wider pore size distribution and its higher internal porosity. This study provides a useful method to understand the variation of each filtration resistance source during filtration. An increase in filtration pressure leads both resistances due to membrane blocking and cake formation to be increased, as a result, causes to a decrease in the filtration flux. The agreement between calculated filtration resistances and experimental data demonstrates the reliability of the proposed method.
    關聯: 淡江理工學刊=Tamkang journal of science and engineering 12(1),頁9-16
    DOI: 10.6180/jase.2009.12.1.02
    顯示於類別:[化學工程與材料工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 大小格式瀏覽次數
    1560-6686_12-1-2.pdf2857KbAdobe PDF389檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋