淡江大學機構典藏:Item 987654321/52297
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8332717      在线人数 : 7956
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧：
  • 您可在西文检索词汇前后加上"双引号"，以获取较精准的检索结果
  • 若欲以作者姓名搜寻，建议至进阶搜寻限定作者字段，可获得较完整数据
    •  进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/52297


    题名: 工業酒精與生質酒精之製造暨其純化 : 化工程序合成與設計
    其它题名: Production/purification of industrial ethanol and bioethanol : chemical process synthesis and design
    作者: 林承澤;Lin, Cheng-tse
    贡献者: 淡江大學化學工程與材料工程學系碩士班
    陳錫仁
    关键词: 工業酒精;生質酒精;程序合成與設計;程序整合;共沸蒸餾;換熱器網路合成;Industrial Ethanol;bioethanol;Process Synthesis and Design;Process Integration;Azeotropic Distillation;Heat exchanger network synthesis
    日期: 2010
    上传时间: 2010-09-23 17:31:51 (UTC+8)
    摘要: 本論文主要分兩個案例，第一個案例為工業酒精，以乙烯直接水解方式製造酒精，分別使用苯與正戊烷兩種共沸劑，達到無水酒精純度與產量要求，並比較不同共沸劑之蒸餘曲線圖及其成本分析；其次，結合狹點技術，比較整合前後之能源消耗。第二個案例為纖維酒精，主要針對其純化之程序，先以側流式蒸餾產製粗製酒精，再以變壓吸附方式達到無水酒精所需純度99.5 wt%。
    論文中主要利用兩套軟體進行研究：“Aspen Plus”與 “SuperTarget”。前者主要是用於程序合成、設計與模擬；後者則是進行狹點分析與換熱器網路合成。
    In the thesis, we have conducted two case studies for the production/purification of industrial ethanol and bioethanol, respectively. For the case of the industrial ethanol, we used a direct hydration process to accomplish the making of crude ethanol; then, we used benzene/n-pentane as an entrainer, separately, to achieve the dehydrated ethanol production with a 99.5 mol% purity. We also compare residue curve maps and cost of manufacture with these two different entrainers. In addition, we also combine the pinch technology in the study in order to compare energy consumptions with/without heat integration. For the case of the bioethanol—the production of cellulosic ethanol, we aim mainly at the purification stage by using a side-draw-distillation technique to manufacture the crude ethanol; then, we used pressure-swing-adsorption technique to achieve the dehydrated ethanol production with a 99.5 wt% purity.
    Two kinds of software were utilized in the research—Aspen Plus and SuperTarget. The former was used for the process synthesis, design, and simulation; the latter was used to carry out the pinch analysis and the synthesis of heat exchanger network.
    显示于类别:[化學工程與材料工程學系暨研究所] 學位論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML345检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈