English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 56829/90534 (63%)
造訪人次 : 12277496      線上人數 : 61
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋
    請使用永久網址來引用或連結此文件: http://tkuir.lib.tku.edu.tw:8080/dspace/handle/987654321/50586


    題名: Effect of anions on electrochemical coagulation for cadmium removal
    作者: Huang, Chien-hung;陳俊成;Chen, Luke;Yang, Chen-lu
    貢獻者: 淡江大學水資源與環境工程學系
    關鍵詞: Electrochemical coagulation;Sulfate;Nitrate;Chloride;Anodic dissolution;Cadmium
    日期: 2009-02-01
    上傳時間: 2010-08-09 20:41:47 (UTC+8)
    出版者: Elsevier
    摘要: Solutions of nitrate, sulfate, chloride and their combinations were prepared and tested in a parallel plate electrochemical cell to study their effect on electrochemical processes. Among the parameters studied were conductivity, current, current efficiency, pH change, coagulant formation, and cadmium removal. Nitrate ions were able to sustain a healthy current in the cell. The current dissolved aluminum from the anode, dissociated water molecules on the cathode, and increased pH in the solution. Due to excessive pH, Al(OH)4− became the dominating species and therefore no coagulant was observed. In sodium sulfate solutions, the aluminum anode quickly built up an inert film that prevented current from crossing the cell. Due to the lack of current, no reaction was observed throughout the 10-min treatment. In sodium chloride solutions, chloride ions provided electrolytic conductivity to sustain a current in the cell. The current dissolved aluminum, generated hydroxyl groups, increased pH, produced coagulant, and removed cadmium from the solution.
    In nitrate–sulfate mixtures, a small amount of nitrate ions dominated the performance of the sulfate solution in an electrochemical process. Although no coagulant was produced, the process removed 50% of the cadmium from the solution through cathodic reduction. In a solution of both sulfate and chloride, chloride ions were able to penetrate the inert film formed in a sulfate solution and drew a healthy current across the cell. Cadmium was initially removed by cathodic reduction followed by coagulation. This mechanism was very effective in cadmium removal. A 10-min treatment removed more than 99.5% of the cadmium, even with a substantial amount of sulfate in the solution.
    關聯: Separation and Purification Technology 65(2), pp.137-146
    DOI: 10.1016/j.seppur.2008.10.029
    顯示於類別:[水資源及環境工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    1-s2.0-S1383586608004127-main.pdf1118KbAdobe PDF1檢視/開啟
    1383-5866_65(2)p137-146.pdf1118KbAdobe PDF287檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋