淡江大學機構典藏:Item 987654321/50531
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 64191/96979 (66%)
造访人次 : 8459916      在线人数 : 8390
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/50531


    题名: Recent developments on microablation of glass materials using excimer lasers
    作者: Tseng, Ampere A.;Chen, Ying-tung;趙崇禮;Chao, Choung-lii;Ma, Kung-jeng;Chen, T. P.
    贡献者: 淡江大學機械與機電工程學系
    关键词: Ablation;Curved surface;Excimer laser;Fused silica;Glass;Diffraction grating;Microlens;Micromachining;Microneedles;Waveguides
    日期: 2007-10-01
    上传时间: 2010-08-09 19:22:31 (UTC+8)
    出版者: Elsevier
    摘要: For many years, the development of effective laser machining techniques for making glass-based microcomponents and devices has been a critical factor in the birth of new photonic and biomedical microsystems. In this article, the characteristics and abilities of excimer lasers for micromachining of a wide range of glass materials are reviewed and studied. Following the introduction, the special features of excimer lasers are discussed. The typical micromachining system used for glass materials is presented. Then, the fundamental micromachining parameters and the associated morphologies of machined surfaces are evaluated. The approaches by controlling the ablation rate for making the curve surfaces are specifically formulated. Although a wide range of commercially available glasses is covered in this article, two types of the most widely used glasses, borosilicate glass and fused silica, are thoroughly examined to illustrate the complexity in micromachining the glass materials. The procedures to machine single, arrayed, curved microstructures are described. The utilizations of these procedures for making microneedles, optical waveguides, submicron grating, and microlenses are specifically demonstrated. Finally, recommendations for future efforts are presented.
    關聯: Optics and Lasers in Engineering 45(10), pp.975-992
    DOI: 10.1016/j.optlaseng.2007.04.003
    显示于类别:[機械與機電工程學系暨研究所] 期刊論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML103检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈