Effect of Backwash on the Performance of Submerged Membrane Filtration

doi:10.1016/j.memsci.2009.01.012

淡江大學機構典藏 > 工學院 > 化學工程與材料工程學系暨研究所 > 期刊論文 > Item 987654321/50487

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/50487

題名:	Effect of Backwash on the Performance of Submerged Membrane Filtration
作者:	黃國楨;Hwang, Kuo-jen;Chan, Chih-sheng;Tung, Kuo-lun
貢獻者:	淡江大學化學工程與材料工程學系
關鍵詞:	Microfiltration;Backwash;Submerged membrane filtration;Membrane blocking
日期:	2009-03-01
上傳時間:	2010-08-09 18:18:24 (UTC+8)
出版者:	Elsevier
摘要:	Particles with a mean diameter of 5 μm were filtered by a ceramic tubular membrane to study the effects of backwash on the performance of submerged membrane filtration. A periodic backwash can completely remove the formed cake, diminishing a part of membrane internal fouling, and, therefore, recover the filtration flux. In a membrane-blocking/cake formation comparable filtration system, the filtration resistance due to membrane-internal fouling is over twice as high as that due to cake formation. The irreversible filtration resistance increases progressively during operation, and it can be regressed to a power-type empirical relationship. Filtration period data were analyzed using blocking models. Membrane blocking occurs in the early filtration periods and is followed by cake filtration. The filtration flux can be simulated by employing blocking models and empirical equations for filtration resistance. The backwash effectiveness was examined by comparing filtrate productivity and washing efficiency. The calculated results of productivity under various backwash durations agree well with experimental data. An increase in backwash flux or duration leads to higher productivity, when the duration is shorter than 2 min; however, the productivity may be decreased with an increase of backwash duration due to the back pumping of more filtrate. A longer filtration time in each cycle results in higher backwash efficiency since a formed cake may efficiently prevent further membrane pore clogging and is more easily removed by a backwash. The optimal backwash conditions can be determined appropriately by the proposed method, with respect to both backwash efficiency and filtrate productivity.
關聯:	Journal of Membrane Science 330(1-2), pp.349-356
DOI:	10.1016/j.memsci.2009.01.012
顯示於類別:	[化學工程與材料工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
0376-7388_330(1-2)p349-356.pdf	1651Kb	Adobe PDF	358	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....