淡江大學機構典藏:Item 987654321/50433
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 62830/95882 (66%)
造访人次 : 4038883      在线人数 : 606
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜寻范围 查询小技巧:
  • 您可在西文检索词汇前后加上"双引号",以获取较精准的检索结果
  • 若欲以作者姓名搜寻,建议至进阶搜寻限定作者字段,可获得较完整数据
  • 进阶搜寻


    jsp.display-item.identifier=請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/50433


    题名: The Design of Acceptance Control Chart for Non-Normal Data
    其它题名: 非常態資料下之允收管制圖設計
    作者: 蔡宗儒;Tsai, Tzong-ru;江俊佑;Chiang, Jyun-you
    贡献者: 淡江大學統計學系
    关键词: 允收管制圖;Burr分配;偏常態分配;第一型錯誤;第二型錯誤;acceptance control chart;burr distribution;skew normal distribution;type Ⅰ error;type Ⅱ error
    日期: 2008-03
    上传时间: 2010-08-09 17:11:48 (UTC+8)
    出版者: 中國工業工程學會
    摘要: 管制圖經常是在常態假設下被設計,但是在某些製造過程中,常態假設經常無法成立。Tsai [12]提出一個偏常態平均數管制圖來監控非常態資料的平均數。他顯示此一管制圖可以有效地改進目前一些已知的管制圖在此一問題平均數監控上的效果。本文以偏常態平均數管制圖為基礎發展出偏常態允收管制圖來監控非常態資料的製程平均數及不良品的比率。當測量值服從對稱分配時,此法可退化到一般的允收管制圖,本文也以兩個實例來舉例說明。由這兩個例子可以看到本文建議的允收管制圖可以很容易地建構,並且也可看出若忽略非常態性將提高管制圖第一型及第二型錯誤的機率。
    Control charts often are designed under the normality assumption. But in some manufacturing processes this assumption may not be valid. Tsai [12] developed a skew normal (average) X (subscript L) control chart to monitor the process average for non-normal data. He showed that a considerable improvement over those of existing control charts can be achieved when the skew normal (average) X (subscript L) control chart is used to monitor the process average. Based on the skew normal (average) X (subscript L) control chart, the paper develops a skew normal acceptance control chart to monitor the process average and the fraction of nonconformities for non-normal data. The proposed acceptance control chart reduces to the conventional acceptance control chart as the underlying distribution of measurements is symmetric. Two examples are given for illustration. The presented examples show that the construction of the proposed acceptance control chart is easy, moreover, ignoring the non-normality effect will result in a higher type I or type II error probability.
    關聯: 工業工程學刊 = Journal of the Chinese Institute of Industrial Engineers 25(2), pp.127-135
    DOI: 10.1080/10170660809509078
    显示于类别:[統計學系暨研究所] 期刊論文

    文件中的档案:

    档案 大小格式浏览次数
    index.html0KbHTML152检视/开启

    在機構典藏中所有的数据项都受到原著作权保护.

    TAIR相关文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回馈