Heat Transfer and Flow Friction for Gaseous Flow in Microtubes

淡江大學機構典藏 > 工學院 > 航空太空工程學系暨研究所 > 期刊論文 > Item 987654321/46007

請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/46007

題名:	Heat Transfer and Flow Friction for Gaseous Flow in Microtubes
作者:	Chen, C. S.;Kuo, W. J.
貢獻者:	淡江大學航空太空工程學系
關鍵詞:	Slip flow;Heat transfer;Microtube flow
日期:	2003-09
上傳時間:	2013-03-20 16:36:30 (UTC+8)
出版者:	臺南市：中國航空太空學會
摘要:	In this paper we propose an analytical and a numerical procedure for solving gaseous slip flow in microtubes. An isothermal flow assumption is needed for the analytical procedure. The analytical solutions are capable of predicting very low Reynolds number microtube flows and compare quite well with the numerical results. The numerical procedure solves the compressible boundary-layer equations using an implicit finite-difference scheme. The parabolic character of the boundary-layer equations renders the numerical procedure a very efficient, accurate and robust tool for studying gaseous slip flows. It takes less than 30 seconds for this numerical procedure to run a typical case on a Pentium IV 1.5G computer. It was observed from the numerical simulations that the fluid goes through a strong expansion process for larger Reynolds number flows and the fluid temperature drops well below the wall temperature. This is quite different from the available experimental data. A reasonable explanation has been offered.
關聯:	中國航空太空學會學刊=Transactions of the Aeronautical and Astronautical Society of the Republic of China 35(3)，頁257-266
顯示於類別:	[航空太空工程學系暨研究所] 期刊論文

文件中的檔案:

檔案	大小	格式	瀏覽次數
index.html	0Kb	HTML	242	檢視/開啟

在機構典藏中所有的資料項目都受到原著作權保護.

TAIR相關文章

資料載入中.....