淡江大學機構典藏:Item 987654321/45845
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4038501      線上人數 : 574
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45845


    題名: Analysis of mold flow and microstructures of die casting in Al alloy/SiC(p) composites
    作者: Lin, C. B.;Wu, C. L.;Chiang, C. H.
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: Porosity;Mold;Settling;Vertical Plane;Irregular Shape
    日期: 1999-05
    上傳時間: 2010-03-26 20:06:46 (UTC+8)
    出版者: Springer
    摘要: The report involves a study of the microstructure of tensile, impact and three-point bending samples of aluminum alloy/SiC(p) composites produced by die casting. The results show that in impact samples, 80 μm SiC particulates cluster along the left and right edges of the section vertical plane with the notch plane, and near the notch. In tensile and three-point bending samples, they were distributed uniformly in the matrix. Furthermore, porosities occurred near the notch in the impact samples. The 80 μm SiC particulates will undergo settling in the shot biscuit. There exist arc and irregular shapes in the clustering section of the particulate. The dendrite arm spacing (DAS) is larger in this section. From the shot biscuit to the bending section of the sprue; the quantity of SiC particulate is less. The SiC particulate is clustered in the protrusive region where the injector pins are situated. We can decrease the porosity of die casting samples effectively by designing the overflow well in a wave shape. We can prevent the melt from adhering to the surface of the mold cavity, thermal cracking on the surface of die casting samples and wear on plungers using electroless nickel plating on the SiC particulate.
    關聯: Journal of materials science 34(9), pp.2229-2240
    DOI: 10.1023/A:1004557103809
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    0KbUnknown434檢視/開啟
    Analysis of mold flow and microstructures of die casting in Al alloy SiC(p) composites.pdf1963KbAdobe PDF2檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋