淡江大學機構典藏:Item 987654321/45815
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 62830/95882 (66%)
造訪人次 : 4041496      線上人數 : 965
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library & TKU Library IR team.
搜尋範圍 查詢小技巧：
  • 您可在西文檢索詞彙前後加上"雙引號"，以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋，建議至進階搜尋限定作者欄位，可獲得較完整資料
    •  進階搜尋


    請使用永久網址來引用或連結此文件: https://tkuir.lib.tku.edu.tw/dspace/handle/987654321/45815


    題名: Development of an automatic surface finishing system (ASFS) with in-process surface topography inspection
    作者: 陳炤彰;Chen, Chao-chang A.;Duffie, Neil A.
    貢獻者: 淡江大學機械與機電工程學系
    關鍵詞: Surface finishing system;Surface topography;In-process inspection;Automation
    日期: 1996-12
    上傳時間: 2010-03-26 20:01:08 (UTC+8)
    出版者: Elsevier
    摘要: This paper describes an automated surface finishing system (ASFS) with in-process surface topography inspection. The acquired surface topography feedback is used to calculate the surface error and to generate the finishing paths for each level of surface finishing of molds and dies. A prototype ASFS was constructed with a CNC machining center, and a laser scanning probe was used in the ASFS to acquire the surface topography data. Surface finishing of a cylindrical-shaped mold cavity was used to verify the effectiveness of the prototype ASFS. Results showed that the surface error was improved toward the specified dimensional tolerance and surface finish.
    關聯: Journal of materials processing technology 62(4), pp.427-430
    DOI: 10.1016/S0924-0136(96)02447-8
    顯示於類別:[機械與機電工程學系暨研究所] 期刊論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    0KbUnknown247檢視/開啟
    Development of an automatic surface finishing system (ASFS) with in-process surface topography inspection.pdf442KbAdobe PDF1檢視/開啟

    在機構典藏中所有的資料項目都受到原著作權保護.

    TAIR相關文章

    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library & TKU Library IR teams. Copyright ©   - 回饋